Paper
17 February 2011 Polymer bragg waveguide ultrasound detectors
Vishnupriya Govindan, Shai Ashkenazi
Author Affiliations +
Abstract
Polymer Bragg Grating Waveguides (BGW) are demonstrated as ultrasound detectors. The device is fabricated by direct electron beam lithography technique using SU-8 as the core material with grating features fabricated on the side walls of the rib waveguide. The main motivation for this design is the linear geometry of the device, which can be used in a linear array facilitating high frequency ultrasound imaging. The fabricated BGW device has a grating periodicity of 530 nm and the grating length is 500 μm. The device is tested for optical resonance spectrum. The BGW device is characterized both optically and acoustically. The BGW device is experimentally demonstrated for the detection of ultrasound waves emitted by a 25 MHz transducer. Detection sensitivity depends on optimal grating design for a steep resonance. The results demonstrate the potential use of BGW devices in highly compact array of optoacoustic detectors for high sensitivity ultrasound detection and photoacoustic imaging.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Vishnupriya Govindan and Shai Ashkenazi "Polymer bragg waveguide ultrasound detectors", Proc. SPIE 7899, Photons Plus Ultrasound: Imaging and Sensing 2011, 78991E (17 February 2011); https://doi.org/10.1117/12.873575
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Ultrasonography

Waveguides

Acoustics

Sensors

Fiber Bragg gratings

Signal detection

Transducers

Back to Top