Paper
15 April 2011 A study of an acid-induced defect on chemically amplified photoresist applied to sub-30nm NAND flash memory
Yong-Hyun Lim, Jae-Doo Eom, Woo-Yung Jung, Min-Sik Jang, Byung-Seok Lee, Jin-Woong Kim
Author Affiliations +
Abstract
Recently, we found a peculiar acid induced defect on chemically amplified photo resist applied to sub- 30nm NAND Flash Memory. This defect is like a hole-pattern with about 1um diameter, and induced by diffusion of acid which makes photoresist soluble in developer, even though photoresist is not exposed with KrF. With some experiment results, we found out that HCl gas, by-product of high temperature oxide which is contained inside voids between two gate lines diffuses into photoresist through high temperature oxide from voids, makes photoresist soluble in developer, and eventually creates the hole-type defect on photoresist. To prevent this defect, we can suggest some methods which are substitution of KrF photoresist into I-line photoresist, modification of oxide deposition recipe to suppress by-product, and applying of non-CAR (Chemically Amplification Resist) type KrF photoresist not sensitive to acid.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yong-Hyun Lim, Jae-Doo Eom, Woo-Yung Jung, Min-Sik Jang, Byung-Seok Lee, and Jin-Woong Kim "A study of an acid-induced defect on chemically amplified photoresist applied to sub-30nm NAND flash memory", Proc. SPIE 7972, Advances in Resist Materials and Processing Technology XXVIII, 79722W (15 April 2011); https://doi.org/10.1117/12.869936
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photoresist materials

Oxides

Silicon

Semiconducting wafers

Silicon films

Photoresist developing

Diffusion

Back to Top