Paper
8 September 2011 Athermal silicon subwavelength grating waveguides
M. Ibrahim, J. H. Schmid, P. Cheben, J. Lapointe, S. Janz, P. J. Bock, A. Densmore, B. Lamontagne, R. Ma, D.-X. Xu, W. N. Ye
Author Affiliations +
Proceedings Volume 8007, Photonics North 2011; 80071L (2011) https://doi.org/10.1117/12.905685
Event: Photonics North 2011, 2011, Ottawa, Canada
Abstract
In this paper, athermal subwavelength grating (SWG) waveguides are investigated. Both numerical simulations and experimental results show that a temperature independent behaviour can be achieved by combining two materials with opposite thermo-optic coefficients within the waveguide. SU-8 polymer with a negative thermo-optic coefficient (dn/dT = -1.1x10-4 K-1) is used in our silicon SWG waveguides to compensate for silicon's positive thermo-optic coefficient of 1.9x10-4 K-1. The grating duty ratio required to achieve an athermal behavior is reported to vary as a function of the operating wavelength and the waveguide dimensions. For example, for athermal waveguides of 260 nm in height, duty ratios of 61.3% and 83.3% were calculated for TE and TM polarized light respectively for a 450 nm wide waveguide, compared to ratios of 79% and 90% for a 350 nm wide waveguide. It is also reported that with increasing width, and increasing height, a smaller grating duty ratio is necessary to achieve an athermal behaviour. A smaller fraction of silicon would hence be needed to compensate for the polymer's negative thermo-optic effect in the waveguide core. Subwavelength sidewall grating (SWSG) waveguides are also proposed here as alternatives to high duty ratio SWG waveguides that are required for guiding TM polarized light. Assuming a duty ratio of 50%, the width of the narrow segments for temperature-independent behavior is found by numerical simulations to be 125 nm and 143 nm for TE and TM polarized light, respectively.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. Ibrahim, J. H. Schmid, P. Cheben, J. Lapointe, S. Janz, P. J. Bock, A. Densmore, B. Lamontagne, R. Ma, D.-X. Xu, and W. N. Ye "Athermal silicon subwavelength grating waveguides", Proc. SPIE 8007, Photonics North 2011, 80071L (8 September 2011); https://doi.org/10.1117/12.905685
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Silicon

Polarization

Thermal optics

Polymers

Polymer multimode waveguides

Numerical simulations

RELATED CONTENT

Polymer Bragg gratings for telecom applications
Proceedings of SPIE (November 25 2002)
Athermal and low loss ridge silicon waveguides
Proceedings of SPIE (February 16 2010)
Slot-based athermal silicon arrayed-waveguide grating (AWG)
Proceedings of SPIE (November 11 2008)
Polymer microphotonics
Proceedings of SPIE (October 20 2003)

Back to Top