Practical mask inspection system with printability and pattern priority verification

Hideo Tsuchiya; Fumio Ozaki; Kenichi Takahara; Takafumi Inoue; Nobutaka Kikuiri

doi:10.1117/12.899487

19 May 2011 Practical mask inspection system with printability and pattern priority verification

Hideo Tsuchiya, Fumio Ozaki, Kenichi Takahara, Takafumi Inoue, Nobutaka Kikuiri

Proceedings Volume 8081, Photomask and Next-Generation Lithography Mask Technology XVIII; 80810D (2011) https://doi.org/10.1117/12.899487
Event: Photomask and NGL Mask Technology XVIII, 2011, Yokohama, Japan

Abstract

Through the four years of study in Association of Super-Advanced Electronics Technologies (ASET) on reducing mask manufacturing Turn Around Time (TAT) and cost, we have been able to establish a technology to improve the efficiency of the review process by applying a printability verification function that utilizes computational lithography simulations to analyze defects detected by a high-resolution mask inspection system. With the advent of Source-Mask Optimization (SMO) and other technologies that extend the life of existing optical lithography, it is becoming extremely difficult to judge a defect only by the shape of a mask pattern, while avoiding pseudo-defects. Thus, printability verification is indispensable for filtering out nuisance defects from high-resolution mask inspection results. When using computational lithography simulations to verify printability with high precision, the image captured by the inspection system must be prepared with extensive care. However, for practical applications, this preparation process needs to be simplified. In addition, utilizing Mask Data Rank (MDR) to vary the defect detection sensitivity according to the patterns is also useful for simultaneously inspecting minute patterns and avoiding pseudo-defects. Combining these two technologies, we believe practical mask inspection for next generation lithography is achievable. We have been improving the estimation accuracy of the printability verification function through discussion with several customers and evaluation of their masks. In this report, we will describe the progress of these practical mask verification functions developed through customers' evaluations.

Citation Download Citation

Hideo Tsuchiya, Fumio Ozaki, Kenichi Takahara, Takafumi Inoue, and Nobutaka Kikuiri "Practical mask inspection system with printability and pattern priority verification", Proc. SPIE 8081, Photomask and Next-Generation Lithography Mask Technology XVIII, 80810D (19 May 2011); https://doi.org/10.1117/12.899487

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available