Paper
8 September 2011 Study of PZT thick-film infrared detectors prepared by MEMS technology
Xiang-Peng Qiang, Gui-Wu Chuan, Bo-Luo Wen, Li-Zhang Wan, Qiang-Cao Jia
Author Affiliations +
Abstract
In this paper, a single element integrated infrared detector using screen printed lead zirconate titanate (PZT) thick films on Pt/Ti/Al2O3/SiO2 coated silicon cup has been developed. The thermal insulating micro-bridge of the detector was prepared by Micro-electro-mechanical System (MEMS) technology. To increase the density of PZT ceramic thick films, cool isostatic pressing experiments had been conducted under 300MPa and 30s dwell time. The XRD pattern shows that PZT thick films possess good perovskite structure. The SEM cross section image demonstrate that the PZT film was dense and the thickness is about 25μm. The dielectric constant, loss and pyroelectric coefficient of PZT thick films prepared at optimized conditions is 1100, 1% and 1×10-8C/Kcm 2, respectively. The results indicated that the PZT thermal sensitive layer fabricated by screen printing on the Pt/Ti coated silicon cup with micro-bridge thermal insulation structure, and Al2O3/SiO2 barrier layer show potential application in infrared detectors.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xiang-Peng Qiang, Gui-Wu Chuan, Bo-Luo Wen, Li-Zhang Wan, and Qiang-Cao Jia "Study of PZT thick-film infrared detectors prepared by MEMS technology", Proc. SPIE 8193, International Symposium on Photoelectronic Detection and Imaging 2011: Advances in Infrared Imaging and Applications, 81934J (8 September 2011); https://doi.org/10.1117/12.901859
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Ferroelectric materials

Silicon

Microelectromechanical systems

Infrared detectors

Silicon films

Printing

Sensors

Back to Top