Paper
19 March 2012 Er3+-doped micro-structured tellurite fiber: laser generation and optical gain
E. F. Chillcce, R. Narro-García, J. W. Menezes, E. Rodriguez, D. Marconi, H. L. Fragnito, L. C. Barbosa
Author Affiliations +
Proceedings Volume 8257, Optical Components and Materials IX; 82570B (2012) https://doi.org/10.1117/12.909026
Event: SPIE OPTO, 2012, San Francisco, California, United States
Abstract
Optical results concerning the generation of laser and optical gain by using an Er3+-doped tellurite micro-structured fiber are reported for the first time. For this purpose a scheme that consist of two 980 nm diode pump lasers (simultaneously in the co-propagating and the counter-propagating directions) and short Er3+-doped tellurite micro-structured fibers (fabricated by using the stack-and-draw technique and a soft glass drawing tower) was used. The laser produced here was obtained within the range 1530 to 1565 nm, and the maximum optical gain obtained was higher than 8 dB.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
E. F. Chillcce, R. Narro-García, J. W. Menezes, E. Rodriguez, D. Marconi, H. L. Fragnito, and L. C. Barbosa "Er3+-doped micro-structured tellurite fiber: laser generation and optical gain", Proc. SPIE 8257, Optical Components and Materials IX, 82570B (19 March 2012); https://doi.org/10.1117/12.909026
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fiber lasers

Laser optics

Structured optical fibers

Glasses

Signal attenuation

Single mode fibers

Fabrication

Back to Top