Electron-beam proximity effect model calibration for fabricating scatterometry calibration samples

Yu-Tian Shen; Chun-Hung Liu; Chih-Yu Chen; Hoi-Tou Ng; Kuen-Yu Tsai; Fu-Ming Wang; Chieh-Hsiung Kuan; Yen-Min Lee; Hsin-Hung Cheng; Jia-Han Li; Alek C. Chen

doi:10.1117/12.918109

5 April 2012 Electron-beam proximity effect model calibration for fabricating scatterometry calibration samples

Yu-Tian Shen, Chun-Hung Liu, Chih-Yu Chen, Hoi-Tou Ng, Kuen-Yu Tsai, Fu-Ming Wang, Chieh-Hsiung Kuan, Yen-Min Lee, Hsin-Hung Cheng, Jia-Han Li, Alek C. Chen

Author Affiliations +

Proceedings Volume 8324, Metrology, Inspection, and Process Control for Microlithography XXVI; 83242K (2012) https://doi.org/10.1117/12.918109
Event: SPIE Advanced Lithography, 2012, San Jose, California, United States

Abstract

Scatterometry has been proven to be effective in critical dimension (CD) and sidewall angle (SWA) measurements with good precision and accuracy. In order to study the effectiveness of scatterometry measurement of line edge roughness (LER), calibration samples with known LER have to be fabricated precisely. The relationship between ITRS LER specifications and the feature dimension design of the LER calibration samples is discussed. Electron-beam-direct-write lithography (EBDWL) has been widely used in nanoscale fabrication and is a natural selection for fabricating the designed calibration samples. With the increasingly demanding requirement of lithography resolution in ITRS, the corresponding LER feature of calibration samples becomes more and more challenging to fabricate, even for EBDWL. Proximity effects in EBDWL due to electron scattering can cause significant distortion of fabricated patterns from designed layouts. Model-based proximity effect correction (MBPEC) is an enhancement method for EBDWL to precisely define fine resist features. The effectiveness of MBPEC depends on the availability of accurate electron-beam proximity effect models, which are usually described by point spread functions (PSFs). In this work, a PSF in a double- Gaussian function form at a 50 kV accelerating voltage, an effective beam size, and a development threshold energy level of the resist are calibrated with EBDWL exposure tests. Preliminary MBPEC results indicate its effectiveness in calibration sample fabrication.

Citation Download Citation

Yu-Tian Shen, Chun-Hung Liu, Chih-Yu Chen, Hoi-Tou Ng, Kuen-Yu Tsai, Fu-Ming Wang, Chieh-Hsiung Kuan, Yen-Min Lee, Hsin-Hung Cheng, Jia-Han Li, and Alek C. Chen "Electron-beam proximity effect model calibration for fabricating scatterometry calibration samples", Proc. SPIE 8324, Metrology, Inspection, and Process Control for Microlithography XXVI, 83242K (5 April 2012); https://doi.org/10.1117/12.918109

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available