Paper
9 April 2013 Visualization of interior structures with nanoscale resolution using ultrasonic-atomic force microscopy
Dong Ryul Kwak, Sun Hee Kim, Ik Keun Park, Judith A. Todd, Chiaki Miyasaka
Author Affiliations +
Abstract
Ultrasonic-Atomic Force Microscopy (U-AFM) was applied to determine the feasibility of visualizing interior features in an ultra-thin film system. As the amplitude and phase of the cantilever resonance frequency changes with local contact stiffness, U-AFM can obtain both surface and subsurface topographic and elastic images. Specimens with nanostructured silicon dioxide (SiO2) patterns deposited on silicon (111) surfaces were fabricated and covered with polymethyl methacrylate (PMMA) films with thicknesses of 800 nm and 1400 nm, respectively. While subsurface features were barely distinguishable beneath the 1400 nm film, 100 nm SiO2 features were clearly visualized for PMMA film thicknesses below and up to 800 nm. This research demonstrates the potential of U-AFM as a powerful technique for visualizing nanoscale subsurface features in microelectronic devices.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Dong Ryul Kwak, Sun Hee Kim, Ik Keun Park, Judith A. Todd, and Chiaki Miyasaka "Visualization of interior structures with nanoscale resolution using ultrasonic-atomic force microscopy", Proc. SPIE 8691, Nanosensors, Biosensors, and Info-Tech Sensors and Systems 2013, 869117 (9 April 2013); https://doi.org/10.1117/12.2012244
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polymethylmethacrylate

Visualization

Atomic force microscopy

Microscopy

Silica

Silicon

Acoustics

Back to Top