Paper
4 June 2014 Conformal grasping using feedback controlled bubble actuator array
Wei Carrigan, Richard Stein, Manoj Mittal, Muthu B. J. Wijesundara
Author Affiliations +
Abstract
This paper presents an implementation of a bubble actuator array (BAA) based active robotic skin, a modular system, onto existing low cost robotic end-effectors or prosthetic hands for conformal grasping of objects. The active skin is comprised of pneumatically controlled polyurethane rubber bubbles with overlaid sensors for feedback control. Sensor feedback allows the BAA based robotic skin to conformally grasp an object with an explicit uniform force distribution. The bubble actuator array reported here is capable of applying up to 4N of force at each point of contact and tested for conformally grasping objects with a radius of curvature up to 57.15mm. Once integrated onto a two-finger gripper with one degree of freedom (DOF), the active skin was shown to reduce point of contact forces of up to 50% for grasped objects.
© (2014) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Wei Carrigan, Richard Stein, Manoj Mittal, and Muthu B. J. Wijesundara "Conformal grasping using feedback controlled bubble actuator array", Proc. SPIE 9116, Next-Generation Robots and Systems, 911607 (4 June 2014); https://doi.org/10.1117/12.2058253
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Actuators

Robotics

Skin

Feedback control

Control systems

Polyurethane

Back to Top