Theoretical analysis and system design of two-photon based optical frequency standards

J. P. Burger; P. Jivan; C. Matthee; R. Kritzinger; H. Hussein; O. Terra

doi:10.1117/12.2066295

23 June 2014 Theoretical analysis and system design of two-photon based optical frequency standards

J. P. Burger, P. Jivan, C. Matthee, R. Kritzinger, H. Hussein, O. Terra

Proceedings Volume 9257, Sensors, MEMS and Electro-Optical Systems; 925705 (2014) https://doi.org/10.1117/12.2066295
Event: Third Conference on Sensors, MEMS and Electro-Optic Systems, 2014, Skukuza, Kruger National Park, South Africa

Abstract

The National Metrology Institute of South Africa (NMISA) is developing a new optical frequency standard based on the Rubidium two-photon transition in collaboration with the National Institute of Standards (NIS, Egypt) that will use both bulk and fiber optics in the system. This is system is called A-POD; an acronym for a portable photonic oscillator device. Rubidium two-photon standards can yield relatively simple and precise standards that are compatible with standard Ti:Sapphire optical frequency combs, as well as the need for a precise frequency standard in the optical telecommunication domain and for measurement of length with a visible beam. The robustness and transportability of the standard are important considerations for the optical frequency standard. This projects implements a framework for better two-photon standards that can be highly accurate, and possibly compete with much more complex clocks in the metrology environment, and especially so in the smaller national metrology institutes found in the developing world. This paper discusses the design constraints and the development considerations towards the optical setup. The robustness and transportability was greatly improved via the usage of optical fiber in the light source of the system, or even in atom-light interaction region. Of particular importance are the beam parameters inside the atomic interaction area. The extent of Doppler broadening and the intensity dependent line shift have to be optimized within practical extents, where both these aspects are affected by the beam shape and optical geometry. A way to fully treat the optical beam effects together with atomic movement is proposed. Furthermore a method is proposed to do real time compensation of intensity dependent light shift, which could have major applicability to frequency standards in general - the complexity is shifted from physical setups to digital signal processing, which is easily adaptable and stable.

Citation Download Citation

J. P. Burger, P. Jivan, C. Matthee, R. Kritzinger, H. Hussein, and O. Terra "Theoretical analysis and system design of two-photon based optical frequency standards", Proc. SPIE 9257, Sensors, MEMS and Electro-Optical Systems, 925705 (23 June 2014); https://doi.org/10.1117/12.2066295

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available