Design and optimization of photolithography friendly photonic components

James Pond; Xu Wang; Jonas Flueckiger; Adam Reid; Jens Niegemann; Amy Liu; Lukas Chrostowski

doi:10.1117/12.2211968

3 March 2016 Design and optimization of photolithography friendly photonic components

James Pond, Xu Wang, Jonas Flueckiger, Adam Reid, Jens Niegemann, Amy Liu, Lukas Chrostowski

Author Affiliations +

Proceedings Volume 9751, Smart Photonic and Optoelectronic Integrated Circuits XVIII; 97510V (2016) https://doi.org/10.1117/12.2211968
Event: SPIE OPTO, 2016, San Francisco, California, United States

Abstract

Silicon photonics is a scalable, cost-effective technology for the production of photonic integrated circuits (PICs). The emergence of silicon photonics as a dominant technology for PICs is largely because it leverages decades of investment in design and fabrication technologies for electronic integrated circuits. However, the lithography requirements for photonic and electronic components are importantly different: geometries are generally curved; sidewall roughness is critically important; and, while the feature sizes are generally much larger, photonic device performance can be extraordinarily sensitive to the precise final geometry. For example, rounding of 90 degree corners in y-branches or multimode interferometers can have a dramatic impact on performance. The use of optical proximity correction (OPC) can greatly reduce these problems but does not eliminate them altogether. The designer is therefore faced with the problem of potentially optimizing a component using highly accurate numerical simulations that cannot be manufactured to the desired geometry, leading to a discrepancy between desired and actual performance. To solve this problem, we present a method for designing and optimizing photonic components that are lithography friendly so that the simulated geometry can be readily manufactured. As an example, we consider the case of waveguide Bragg gratings which are particularly challenging to manufacture by lithography.

Citation Download Citation

James Pond, Xu Wang, Jonas Flueckiger, Adam Reid, Jens Niegemann, Amy Liu, and Lukas Chrostowski "Design and optimization of photolithography friendly photonic components", Proc. SPIE 9751, Smart Photonic and Optoelectronic Integrated Circuits XVIII, 97510V (3 March 2016); https://doi.org/10.1117/12.2211968

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE