Paper
5 November 2015 Optical tomographic scanning target-tracking system based on single pixel sensor
Baosheng Li, Yicheng Wang, Jiuchun Yang
Author Affiliations +
Proceedings Volume 9795, Selected Papers of the Photoelectronic Technology Committee Conferences held June–July 2015; 97951G (2015) https://doi.org/10.1117/12.2216032
Event: Selected Proceedings of the Photoelectronic Technology Committee Conferences held June-July 2015, 2015, Hefei, Suzhou, and Harbin, China
Abstract
Optical tomography imaging had the characteristics of high resolution. The rotating periscope system and modulating plate with 65 slits were designed. Filter back projection (FBP) algorithm was applied to the one-dimensional signals, which were obtained by multi-angle scanning in modulating plate, to reconstruct two-dimensional image. Single pixel photoelectric sensor has high frequency response and can acquire high speed real-time signal. This work had carried on the simulation and experiment about scanning system based on the analysis and determination about the modulating plate’s parameters, and verify the feasibility of scanning system. In this paper, the method plays an important role in developing novel target tracking system and provides deep foundation for deeper experimental research.
© (2015) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Baosheng Li, Yicheng Wang, and Jiuchun Yang "Optical tomographic scanning target-tracking system based on single pixel sensor", Proc. SPIE 9795, Selected Papers of the Photoelectronic Technology Committee Conferences held June–July 2015, 97951G (5 November 2015); https://doi.org/10.1117/12.2216032
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Modulation

Imaging systems

Tomography

Sensors

Optical tomography

Optical scanning systems

Image resolution

Back to Top