1 December 2009 Automatic building extraction from LIDAR digital elevation models and WorldView imagery
Nima Ekhtari, Mohammad Javad Valadan Zoej, Mahmoud Reza Sahebi, Ali Mohammadzadeh
Author Affiliations +
Abstract
This paper proposes an automatic approach for building extraction in suburban and rural areas by integrating the light detection and ranging (LIDAR) data and WorldView imagery. This approach consists of two major steps: building detection and 2D building reconstruction. In the first step, a normalized digital surface model (nDSM) is produced from LIDAR data. Then a building mask is obtained from nDSM based on the elevation and roughness analyses. In the second step, the building mask, along with orthoimage are used to determine preliminary position of the building boundaries. Then a least square line fitting process is applied to produce line segments. Finally the boundaries of buildings are reconstructed by grouping line segments, and intersection of the favorable groups. The proposed approach has shown a 92.5% completeness and 94.75% correctness.
Nima Ekhtari, Mohammad Javad Valadan Zoej, Mahmoud Reza Sahebi, and Ali Mohammadzadeh "Automatic building extraction from LIDAR digital elevation models and WorldView imagery," Journal of Applied Remote Sensing 3(1), 033571 (1 December 2009). https://doi.org/10.1117/1.3284718
Published: 1 December 2009
Lens.org Logo
CITATIONS
Cited by 30 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
LIDAR

Image segmentation

3D modeling

Data modeling

Image processing

Edge detection

Sensors

RELATED CONTENT


Back to Top