1 July 1988 Optical Superresolution Using Solid-State Cameras And Digita; Signal Processing
Peter Seitz
Author Affiliations +
Abstract
A common problem in optical metrology is the determination of the exact location of an edge (a black/white transition). The use of cameras for this task has been restricted in the past because of their limited number of pixels and the lack of methods for subpixel accuracy edge detection. Analysis of the optical and electronic parts of modern solid-state cameras shows that it is possible to determine the exact location of an edge to subpixel accuracy, independently of the system's modulation transfer function. A novel algorithm for this purpose is presented together with an expression for the precision of the edge location as a function of pixel noise and edge step height. Experimental verification was carried out using a modified CCD camera coupled to an intelligent framestore (smart camera). Under optimum conditions the measured accuracy for the edge position was better than 1/140 of the pixel period, corresponding to less than 120 nm on the sensor surface of the camera. Applications of this novel method in metrology and micrometrology are discussed.
Peter Seitz "Optical Superresolution Using Solid-State Cameras And Digita; Signal Processing," Optical Engineering 27(7), 277535 (1 July 1988). https://doi.org/10.1117/12.7976719
Published: 1 July 1988
Lens.org Logo
CITATIONS
Cited by 40 scholarly publications and 5 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Solid state cameras

Cameras

Signal processing

Super resolution

CCD cameras

Edge detection

Modulation transfer functions

RELATED CONTENT

Computational imaging: the improved and the impossible
Proceedings of SPIE (September 23 2015)
Optimization of CMOS APS pixel
Proceedings of SPIE (August 01 2003)
Image-intensified video camera evaluation
Proceedings of SPIE (November 03 2000)

Back to Top