28 June 2016 Photothermal camera port accessory for microscopic thermal diffusivity imaging
Facundo Zaldívar Escola, Darío Kunik, Nelly Mingolo, Oscar E. Martínez
Author Affiliations +
Abstract
The design of a scanning photothermal accessory is presented, which can be attached to the camera port of commercial microscopes to measure thermal diffusivity maps with micrometer resolution. The device is based on the thermal expansion recovery technique, which measures the defocusing of a probe beam due to the curvature induced by the local heat delivered by a focused pump beam. The beam delivery and collecting optics are built using optical fiber technology, resulting in a robust optical system that provides collinear pump and probe beams without any alignment adjustment necessary. The quasiconfocal configuration for the signal collection using the same optical fiber sets very restrictive conditions on the positioning and alignment of the optical components of the scanning unit, and a detailed discussion of the design equations is presented. The alignment procedure is carefully described, resulting in a system so robust and stable that no further alignment is necessary for the day-to-day use, becoming a tool that can be used for routine quality control, operated by a trained technician.
© 2016 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2016/$25.00 © 2016 SPIE
Facundo Zaldívar Escola, Darío Kunik, Nelly Mingolo, and Oscar E. Martínez "Photothermal camera port accessory for microscopic thermal diffusivity imaging," Optical Engineering 55(6), 064110 (28 June 2016). https://doi.org/10.1117/1.OE.55.6.064110
Published: 28 June 2016
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Cameras

Microscopes

Laser beam diagnostics

Modulation

Optical fibers

Optical components

Back to Top