KEYWORDS: Digital micromirror devices, Switches, Optical switching, Mirrors, Switching, Diffraction, Binary data, Data centers, Signal attenuation, Microelectromechanical systems
Presented here is a 32 × 32 optical switch for telecommunications applications capable of reconfiguring at speeds of up to 12 microseconds. The free space switching mechanism in this interconnect is a digital micromirror device (DMD) consisting of a 2D array of 10.8μm mirrors optimized for implementation at 1.55μm. Hinged along one axis, each micromirror is capable of accessing one of two positions in binary fashion. In general reflection based applications this corresponds to the ability to manifest only two display states with each mirror, but by employing this binary state system to display a set of binary amplitude holograms, we are able to access hundreds of distinct locations in space. We previously demonstrated a 7 × 7 switch employing this technology, providing a proof of concept device validating our initial design principles but exhibiting high insertion and wavelength dependent losses. The current system employs 1920 × 1080 DMD, allowing us to increase the number of accessible ports to 32 × 32. Adjustments in imaging, coupling component design and wavelength control were also made in order to improve the overall loss of the switch. This optical switch performs in a bit-rate and protocol independent manner, enabling its use across various network fabrics and data rates. Additionally, by employing a diffractive switching mechanism, we are able to implement a variety of ancillary features such as dynamic beam pick-off for monitoring purposes, beam division for multicasting applications and in situ attenuation control.
We present here the use the DMD as a diffraction-based optical switch, where Fourier diffraction patterns are used to steer the incoming beams to any output configuration. We have implemented a single-mode fiber coupled N X N switch and demonstrated its ability to operate over the entire telecommunication C-band centered at
1550 nm. The all-optical switch was built primarily with off-the-shelf components and a Texas Instruments
DLP7000™with an array of 1024 X 768 micromirrors. This DMD is capable of switching 100 times faster than currently available technology (3D MOEMS). The switch is robust to typical failure modes, protocol and bit-rate agnostic, and permits full reconfigurable optical add drop multiplexing (ROADM).
The switch demonstrator was inserted into a networking testbed for the majority of the measurements. The testbed assembled under the Center for Integrated Access Networks (ClAN), a National Science Foundation (NSF) Engineering Research Center (ERC), provided an environment in which to simulate and test the data routing functionality of the switch. A Fujitsu Flashwave 9500 PS was used to provide the data signal, which was sent through the switch and received by a second Flashwave node. We successfully transmitted an HD video stream through a switched channel without any measurable data loss.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.