The structural properties of PMMA, which has been melt-spun and treated using a specific cooling profile, is investigated in order to evoke desired optical and mechanical properties. Several PMMA fibres, which had been melt spun and subsequently processed with different temperature profiles, were analysed by small-angle X-ray scattering (SAXS) measurements. These results will be compared to a combination of numerical models, which consider the quenching of a filamentary PMMA polymer melt in water. This multi-scale simulation considers macroscopically the cooling process in the water and within the fiber. The spatially resolved cooling rates, which have been simulated at different locations serve as input for a 3D-Monte-Carlo polymer simulation model, which takes, among others, the Lennard-Jones, the bending and bond potentials into account in order to predict the resulting PMMA structure of the fabricated fiber
These simulated structures are then evaluated in order to analyse their macroscopic properties. These comprise for instance the polymer entanglement, which describes the interaction of neighboring polymer chains leading to stronger, but stiffer fibers. Entanglement will also affect the glass-transition temperature, which determines the maximum operation temperature. But this can also lead to increased optical scattering, which will be subject to investigations, as well.
KEYWORDS: Monte Carlo methods, Polymers, Particles, Polymer optical fibers, Computer simulations, Polymethylmethacrylate, Mechanics, Chemical species, 3D modeling, Device simulation
We present a model for a Monte-Carlo simulation of polymer optical fiber fabrication based on a novel method using heat treatment after melt spinning. The polymer is modeled using three-dimensional bond-fluctuation with the Leonard-Johns potential for non-bonded interactions of different polymers alongside the bond, bend and torsion potential for the bonded interactions within the same polymer. The studied fabrication parameters were different cooling rates, pressure and the polymer chain length. Their influence is investigated on properties such as the radius of gyration RG, physical and optical density ρ and n, and the isothermal compressibility, which will be affected e.g. by the phase-transition temperature Tg. They influence both mechanical and optical properties of the produced fiber.
We present new results regarding a novel melt spinning process for the continuous production of polymer optical fibers (POF) with a graded index profile. The fabrication process comprises a conventional melt spinning process of PMMA and a conclusive abrupt cooling of the monofilament. During the quenching, the outer part of the fiber cools down faster than the inner part, which leads to a density gradient within the fiber due to the time difference for thermal expansion along the fiber radius. This results in a radial density and by that in a refractive-index profile. The density of the POFs is determined with a pycnometer. Moreover, the structural properties of the fibers are investigated by small-angle X-ray scattering (SAXS). Lastly, the resulting optical parameters such as refractive-index profile, fiber attenuation and scattering properties, are studied and related to the manufacturing parameters. The measurements of the density and refractive index show that the refractive-index profile of a PMMA fiber can be strongly influenced in the outer sector of the fiber, but the influence decreases radially inwards. The SAXS measurements indicate different polymer chain structures within the fiber form.
We present a novel fiber type with a trilobal, non-circular cross section. The fiber is designed for illumination purposes with a special shape in order to form a distinct asymmetrical radiation pattern, which can be used to concentrate light on particular locations in order to cure resins or polymers but can also find its applications for illumination purposes.
In this paper we present a novel melt-spinning fabrication process for graded-index polymer optical fibers that completely avoids additional dopants for the formation of the refractive-index profile. In the presented process the meltspun fiber is rapidly cooled down so that the inner and outer parts of the fiber solidify at different speeds resulting in a density gradient. This density variation leads to a refractive-index profile without any further dopants. We present achieved results for fibers made of PMMA, and also first preliminary results for bio polymers such as TPU.
In this paper, spatial light modulation is applied to investigate the selective mode properties of multimode fibers (MMF) and MMF couplers. Spatial light modulator is applied only on the MMF input to excite a selected linearly polarized eigenmode of the MMF. At the system output the impulse and frequency response is studied. By an additional time separation of mode groups achieved during propagation in the MMF, a mode group to mode group transfer matrix of the MMF coupler can be obtained.
KEYWORDS: Modulation, Signal to noise ratio, Light emitting diodes, Polymer optical fibers, Digital signal processing, Linear filtering, Signal attenuation, Electronic filtering, Analog electronics, Receivers
The step-index polymer optical fiber (SI-POF) is an attractive transmission medium for high speed communication links
in automotive infotainment networks, in industrial automation, and in home networks. Growing demands for quality of
service, e.g., for IPTV distribution in homes and for Ethernet based industrial control networks will necessitate Gigabit
speeds in the near future. We present an overview on recent advances in the design of spectrally efficient and robust
Gigabit-over-SI-POF transmission systems.
In short-reach connections, large-diameter multimode fibres allow for robust and easy connections. Unfortunately,
their propagation properties depend on the excitation conditions. We propose a launching technique using a
fibre stub that can tolerate fabrication tolerances in terms of tilts and off-sets to a large extent. A study of
the influence of displaced connectors along the transmission link shows that the power distributions approach
a steady-state power distribution very similar to the initial distribution established by the proposed launching
scheme.
We investigate the performance of two different all-optical wavelength conversion configurations: four-wave mixing in
highly nonlinear fiber and cascaded second harmonic and difference frequency generation in periodically poled Lithium
Niobate. Both configurations have the capability to convert phase-modulated signals with high data rates. Error free
wavelength conversion of up to 160 Gbit/s DPSK and 320 Gbit/s DQPSK data signals is demonstrated. The converter
using highly non-linear fiber can have advantages in network applications in which cascaded wavelength conversion are
requested due to its potentially higher conversion efficiency and OSNR. The Lithium Niobate converter generates no
phase distortion by wavelength conversion of phase-modulated signals. This could be useful for applications utilizing
PSK formats with 2 bit per symbol or more, like DQPSK or 8-PSK.
The concept of a nonlinear transfer function of a fibre-optic communication link is reviewed. Also an approximation of the nonlinear transfer function is introduced, which allows to define an equivalent single-span model of a dispersion-managed multi-span system. In this paper we will show its limits of validity and try to extent these limits by enhancing the theoretical model. In this respect we will discuss the impact of dispersion precompensation and show the influence of residual dispersion per span, number of spans and local dispersion on transmission systems with on-off keying and differential phase-shift keying modulation formats. This approach allows fast assessment of the performance of a given modulation format over various dispersion maps by reducing the need for extensive numerical simulations.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.