Dr. György Mező Profile

Dr. György Mező

at Konkoly Observatory

SPIE Involvement:

Author

Publications (12)

Proceedings Article | 28 August 2024 Presentation + Paper

L-band nulling interferometry at the VLTI with Asgard/NOTT: status and plans

Denis Defrère, Romain Laugier, Marc-Antoine Martinod, Germain Garreau, Kwinten Missiaen, Muhammad Salman, Gert Raskin, Colin Dandumont, Steve Ertel, Michael Ireland, Stefan Kraus, Lucas Labadie, Alexandra Mazzolli, Gyorgy Medgyesi, Ahmed Sanny, Olivier Absil, Peter Ábráham, Jean-Philippe Berger, Myriam Bonduelle, Azzurra Bigioli, Emilie Bouzerand, Josh Carter, Nick Cvetojevic, Benjamin Courtney-Barrer, Adrian Glauser, Simon Gross, Xavier Haubois, Noel James, Andras Peter Joo, Stephane Lagarde, Alain Léger, Jarron Leisenring, Jérôme Loicq, Guillermo Martin, Frantz Martinache, Gyorgy Mezo, Sébastien Morel, Johan Morren, Marc Ollivier, Gordon Robertson, Hélène Rousseau, Warrick Schofield, Nicolas Schuhler, Adam Taras, Bart Vandenbussche, Julien Woillez

Proceedings Volume 13095, 130950F (2024) https://doi.org/10.1117/12.3019922

KEYWORDS: Equipment, Planets, Nulling interferometry, Interferometers, Stars, Exoplanets, Sensors, Photonics, Observational astronomy, Design

Read Abstract +

Proceedings Article | 29 August 2022 Presentation + Paper

Additively manufactured flexure for astronomy instrumentation

Katherine Morris, Carolyn Atkins, Lucy Reynolds, James Walpole, Bart van de Vorst, Robert M. Snell, Chris Miller, Szigfrid Farkas, György Mező, Mélanie Roulet, Afrodisio Vega Moreno, Fabio Tenegi, Andrew Conley, Hermine Schnetler

Proceedings Volume 12188, 121880Z (2022) https://doi.org/10.1117/12.2630180

KEYWORDS: Manufacturing, Additive manufacturing, Actuators, Astronomy, Titanium, Aluminum, Metals, MATLAB, Scanning electron microscopy, Optics manufacturing

Read Abstract +

Proceedings Article | 29 August 2022 Presentation + Paper

The OPTICON A2IM Cookbook: an introduction to additive manufacture for astronomy

Carolyn Atkins, L. G. T. (Bart) van de Vorst, Andrew Conley, Szigfrid Farkas, Emmanuel Hugot, György Mező, Katherine Morris, Mélanie Roulet, Robert M. Snell, Fabio Tenegi-Sanginés, Iain Todd, Afrodisio Vega-Moreno, Hermine Schnetler

Proceedings Volume 12188, 121880W (2022) https://doi.org/10.1117/12.2627244

KEYWORDS: Computer aided design, Metals, Additive manufacturing, Optics manufacturing, Astronomy, Astronomical instrumentation, Mirrors, Lightweight mirrors, Printing, 3D printing

Read Abstract +

Proceedings Article | 13 December 2020 Presentation + Paper

H2020 opticon WP5 overview: investigating the use of additive manufacturing AM) for the design and build of multifunctional integrated astronomical components

Hermine Schnetler, Bart van de Vorst, Robert Snell, Carolyn Atkins, Chris Miller, Katherine Morris, Szigfrid Farkas, György Mező, Mélanie Roulet, Emmanuel Hugot, Afrodisio Vega Moreno, Fabio Tenegi, Joris Dufils

Proceedings Volume 11451, 114511P (2020) https://doi.org/10.1117/12.2560828

KEYWORDS: Additive manufacturing, Astronomy, Mirrors, Optics manufacturing, Astronomical imaging, Integrated optics, Cryogenics, Printing, Materials processing, Optical components

Read Abstract +

Proceedings Article | 13 December 2020 Poster + Paper

Design for additive manufacture (DfAM): the “equivalent continuum material” for cellular structures analysis

Afrodisio Vega, Fabio Tenegi, Juan Francisco Márquez, Juan Calvo, Hermine Schnetler, Carolyn Atkins, Chris Miller, Katherine Morris, Robert Snell, Bart van de Vorst, Joris Dufils, Leon Brouwers, Mélanie Roulet, Emmanuel Hugot, Szigfrid Farkas, Gyorgy Mezo

Proceedings Volume 11450, 1145028 (2020) https://doi.org/10.1117/12.2560999

KEYWORDS: Additive manufacturing, Design for manufacturability, Modeling, Prototyping, Structural design

Read Abstract +

Proceedings Article | 13 December 2020 Presentation + Paper

An additive manufactured CubeSat mirror incorporating a novel circular lattice

Robert Snell, Carolyn Atkins, Hermine Schnetler, Iain Todd, Everth Hernández-Nava, Alistair Lyle, George Maddison, Katherine Morris, Christopher Miller, Mélanie Roulet, Emmanuel Hugot, Fabio Tenegi Sanginés, Afrodisio Vega-Moreno, L. T. G. (Bart) van de Vorst, Joris Dufils, Leon Brouwers, Szigfrid Farkas, György Mező, Mat Beardsley, Michael Harris

Proceedings Volume 11451, 114510C (2020) https://doi.org/10.1117/12.2562738

KEYWORDS: Mirrors, Additive manufacturing, Prototyping, Interferometry, 3D printing, Telescopes, Interfaces, Silicon, Aluminum, Single point diamond turning

Read Abstract +

Proceedings Article | 13 December 2020 Poster + Paper

Freeform active mirror designed for additive manufacturing

Szigfrid Farkas, Tibor Agócs, Carolyn Atkins, Leon Brouwers, Joris Dufils, András Joó, György Mező, Katherine Morris, Michiel Rodenhuis, Mélanie Roulet, Hermine Schnetler, Robert Snell, Fabio Tenegi-Sanginés, Afrodisio Vega-Moreno, Bart van de Vorst

Proceedings Volume 11451, 114512M (2020) https://doi.org/10.1117/12.2561327

KEYWORDS: Additive manufacturing, Disk lasers, Actuators, Optics manufacturing, Telescopes, Mirrors, Prototyping, Optical fabrication, Assembly tolerances, Interfaces

Read Abstract +

Proceedings Article | 20 April 2020 Presentation + Paper

Use of 3D printing in astronomical mirror fabrication

Mélanie Roulet, Carolyn Atkins, Emmanuel Hugot, Robert Snell, Bart van de Vorst, Katherine Morris, Michel Marcos, Iain Todd, Christopher Miller, Joris Dufils, Szigfrid Farkas, Gyorgy Mezo, Fabio Tenegi, Afrodisio Vega-Moreno, Hermine Schnelter

Proceedings Volume 11349, 113490D (2020) https://doi.org/10.1117/12.2556921

KEYWORDS: Mirrors, Surface finishing, Computer aided design, Polishing, Printing, 3D printing, Prototyping, Monochromatic aberrations, Manufacturing, Finite element methods

Read Abstract +

Proceedings Article | 10 July 2018 Presentation + Paper

Characterization of an f/2 freeform active mirror

Szigfrid Farkas, Tibor Agócs, Gabby Aitink-Kroes, Lee Chapman, William Cochrane, Wayne Holland, Emmanuel Hugot, Fahad Iqbal, Dávid Jáger, Michel Marcos, György Mező, Maria Milanova, Chris Miller, David Montgomery, Michiel Rodenhuis, Mélanie Roulet, Hermine Schnetler

Proceedings Volume 10706, 1070617 (2018) https://doi.org/10.1117/12.2313413

KEYWORDS: Actuators, Mirrors, Finite element methods, Computer aided design, Optics manufacturing, Optical testing, Solid modeling, Control systems, Performance modeling

Read Abstract +

Proceedings Article | 9 August 2016 Paper

The Fly's Eye camera system: new results with an autonomously observing telescope

L. Mészáros, A. Pal, A. Jaskó, G. Csépány, Gy. Mező, K. Vida, K. Oláh

Proceedings Volume 9908, 99085T (2016) https://doi.org/10.1117/12.2233586

KEYWORDS: Cameras, Eye, Imaging systems, Telescopes, Astronomy, Stars, Lenses, Actuators, Electronics, Sensors

Read Abstract +

Proceedings Article | 22 July 2014 Paper

Fly's Eye camera system: optical imaging using a hexapod platform

Attila Jaskó, András Pál, Krisztián Vida, László Mészáros, Gergely Csépány, György Mező

Proceedings Volume 9145, 91453S (2014) https://doi.org/10.1117/12.2055486

KEYWORDS: Cameras, Eye, Imaging systems, Actuators, Computer programming, Astronomy, Optical imaging, Mechanics, Sensors, Image resolution

Read Abstract +

Proceedings Article | 14 July 2008 Paper

Combined optically addressable spatial light modulator for affordable adaptive optics

László Orzó, György Mező, Szabolcs Tőkes, András Radványi

Proceedings Volume 7015, 70153M (2008) https://doi.org/10.1117/12.787956

KEYWORDS: Adaptive optics, Field programmable gate arrays, Sensors, Liquid crystal on silicon, Optically addressed spatial light modulators, Wavefronts, Wavefront sensors, CMOS sensors, Data processing, Image processing

Read Abstract +

Showing 5 of 12 publications

View contact details

UPDATE YOUR PROFILE

Is this your profile? Update it now.

Sign into your SPIE.org account

Don’t have a profile and want one?

Create an account on SPIE.org

Keywords/Phrases

Search In:

Publication Years