SPEXone is a compact multi-angle spectropolarimeter that measures both spectral intensity and the state of linear polarization of light scattered by aerosols in the Earth’s atmosphere at five different viewing angles simultaneously. This enables a very accurate quantification and characterization of atmospheric aerosols, helping us to better understand their effects on global climate and air quality. Building upon the success of its predecessor SPEXone, which has been launched in 2024 as part of the NASA PACE observatory, a second and improved instrument, SPEXone Second Generation, has been built within the ESA PRODEX program. Most recently, the integrated instrument underwent full on-ground characterization and calibration in ambient conditions at SRON. This contribution gives an overview of the measurements and presents preliminary results from the characterization and calibration campaign, focusing on the instrument performance. A few key performance aspects such as straylight, spatial and spectral resolution are discussed, with data from SPEXone for PACE serving as a comparison. The result of the analysis shows excellent image quality and indicates an improvement in the amount of diffuse straylight.
The Large Area Detector (LAD) is the high-throughput, spectral-timing instrument designed for the eXTP (enhanced Xray Timing and Polarimetry) mission, a major project of the Chinese Academy of Sciences and China National Space Administration. The eXTP science case involves the study of matter under extreme conditions of gravity, density and magnetism. The eXTP mission is currently performing a phase B study, expected to be completed by the end of 2024. The target launch date is end-2029. Until recently, the eXTP scientific payload included four instruments (Spectroscopy Focusing Array, Polarimetry Focusing Array, Large Area Detector and Wide Field Monitor) offering unprecedented simultaneous wide-band X-ray timing and polarimetry sensitivity. The mission designed was however rescoped in early 2024 to meet the programmatic requirements of a final mission adoption in the context of the Chinese Academy of Sciences. Negotiations are still ongoing at agency level to assess the feasibility of a European participation to the payload implementation, by providing the LAD and WFM instruments, through a European Consortium composed of institutes from Italy, Spain, Austria, Czech Republic, Denmark, France, Germany, Netherlands, Poland, Switzerland and Turkey. At the time of writing, the LAD instrument is thus a scientific payload proposed for inclusion on eXTP. The LAD instrument for eXTP is based on the design originally proposed for the LOFT mission within the ESA-M3 context. The eXTP/LAD envisages a deployed >3 m2 effective area in the 2-30 keV energy range, achieved through the technology of the large-area Silicon Drift Detectors - offering a spectral resolution of up to 200 eV FWHM at 6 keV - and of capillary plate collimators - limiting the field of view to about 1 degree. In this paper we provide an overview of the LAD instrument design and the status of its maturity when approaching nearly the end of its phase B study.
The Enhanced X-ray Timing and Polarimetry (eXTP) mission is a flagship astronomy mission led by the Chinese Academy of Sciences (CAS) and scheduled for launch in 2029. The Large Area Detector (LAD) is one of the instruments on board eXTP and is dedicated to studying the timing of X-ray sources with unprecedented sensitivity. The development of the eXTP LAD involves a significant mass production of elements to be deployed in a significant number of countries (Italy, Austria, Germany, Poland, China, Czech Republic, France). This feature makes the Manufacturing, Assembly, Integration and Test (MAIT), Verification and Calibration the most challenging and critical tasks of the project. An optimized Flight Model (FM) implementation plan has been drawn up, aiming at a production rate of 2 Modules per week. This plan is based on the interleaving of a series of parallel elementary activities in order to make the most efficient use of time and resources and to ensure that the schedule is met.
In this contribution, the detector-characterization results and some of the on-ground calibration plans are presented for an adjusted and improved SPEXone satellite instrument. SPEXone is a highly compact multi-angle space spectro-polarimeter developed by a Dutch consortium for the NASA PACE observatory scheduled for launch early 2024. This instrument will enable detailed characterization of the microphysical properties of fine particulate matter or aerosols in the atmosphere from low Earth orbit, which is essential for climate, ecosystem, and human-health science. A successor to the SPEXone instrument is currently being developed, with a wider swath as the main change (250 km instead of 100 km), and with several design improvements to reduce straylight. The detector firmware was adjusted to enable the required higher frame rate, and to make the readout more robust. The detector was characterized in a similar way as for PACE, though even more extensively based on lessons learned. In particular, full illumination measurements were complemented with partial illumination measurements, where parts of the detector are covered using dedicated detector masks, to investigate peculiar signal-induced offset effects that were observed only late for PACE. Additionally, direct memory measurements were performed using time-dependent illumination generated using a fast electronic shutter. Following the detector characterization, instrument-calibration preparations have started. The instrument will be fully calibrated in ambient, complemented with a highly selective set of measurements in vacuum. The approach followed will be similar to PACE, but modifications will be made to deal with the increased swath. Important improvements will be implemented to improve the data quality, such as increased number of wavelengths for straylight measurements.
The Large Area Detector (LAD) is the high-throughput, spectral-timing instrument onboard the eXTP mission, a flagship mission of the Chinese Academy of Sciences and the China National Space Administration, with a large European participation coordinated by Italy and Spain. The eXTP mission is currently performing its phase B study, with a target launch at the end-2027. The eXTP scientific payload includes four instruments (SFA, PFA, LAD and WFM) offering unprecedented simultaneous wide-band X-ray timing and polarimetry sensitivity. The LAD instrument is based on the design originally proposed for the LOFT mission. It envisages a deployed 3.2 m2 effective area in the 2-30 keV energy range, achieved through the technology of the large-area Silicon Drift Detectors - offering a spectral resolution of up to 200 eV FWHM at 6 keV - and of capillary plate collimators - limiting the field of view to about 1 degree. In this paper we will provide an overview of the LAD instrument design, its current status of development and anticipated performance.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.