We describe the cryogenic system being developed for Taurus: a super-pressure balloon-borne microwave polarimeter scheduled to fly in 2027. The Taurus cryogenic system consists of a 660L liquid helium cryostat which achieves a base temperature of ≤100mK with the help of a capillary-fed superfluid tank and a closed cycle dilution refrigerator. The main tank is supported with fiberglass flexures and is encased in two layers of vapor-cooled shields which allow Taurus to make full use of the extended flight time offered by the super-pressure balloon platform. The Taurus cryostat is projected to hold for over 50 days while weighing under 1000lbs. We present the design, testing, and thermal analysis of the Taurus cryogenic systems.
The Super-pressure Balloon-borne Imaging Telescope (SuperBIT) was a diffraction limited 0.5m optical-to-near-UV telescope that was designed to study dark matter via cluster weak lensing. SuperBIT launched from Wanaka, New Zealand via NASA’s super-pressure balloon (SPB) technology on April 16, 2023 and remained in the stratosphere for 40 days. During the flight, SuperBIT obtained multi-band images for 30 science targets; data analysis to produce shear measurements for each target is ongoing. SuperBIT’s pointing system comprised three nested frames that stablized the entire telescope within 0.34 arcseconds rms, plus a back-end tip-tilt mirror that achieved focal plane image stability of 0.055 arcseconds rms during 300 second exposures. The power system reached full charge every day and never dropped below 30% at night. All components remained within their temperature limits, and actively controlled components remained within a standard deviation of ∼0.1K of their set point. In this paper we provide an overview of the flight trajectory behaviour and flight operations. The first two days of the flight were used for payload characterization and telescope alignment after which all night time was dedicated to science observations. Target scheduling was performed by an on-board “Autopilot” system which tracked available targets and prioritized completing targets over starting new targets. SuperBIT was the first balloon telescope to fly a Starlink dish to enable high-bandwidth communications with the payload. Prior to flight termination, two Data Retrieval System modules were deployed to provide a redundant data recovery method.
High precision sub-arcsecond pointing stability has become a capability widely utilized in the balloon-borne community, in particular for high resolution optical systems. However, many of these applications are also pushing the state-of-the-art with regards to detector technology, many forms of which require some level of cryogenic cooling and active dissipative cooling systems to achieve target performance specifications. Built on the success of the Super-pressure Balloon-borne Imaging Telescope (SuperBIT) experiment, we present the results of improved technologies and design methodologies applied to the EXoplanet Infrared TElescope (EXCITE), which uses active cryogenic systems to achieve detector performance while requiring pointing stability at the 100 milliarcsecond level. Results from EXCITE's recent balloon-borne campaign are presented within the context of Super-pressure Balloon (SPB) and Long Duration Balloon (LDB) applications.
The Super-pressure Balloon-borne Imaging Telescope (SuperBIT) is a near-diffraction-limited 0.5m telescope that launched via NASA’s super-pressure balloon technology on April 16, 2023. SuperBIT achieved precise pointing control through the use of three nested frames in conjunction with an optical Fine Guidance System (FGS), resulting in an average image stability of 0.055” over 300-second exposures. The SuperBIT FGS includes a tip-tilt fast-steering mirror that corrects for jitter on a pair of focal plane star cameras. In this paper, we leverage the empirical data from SuperBIT’s successful 39-day stratospheric mission to inform the FGS design for the next-generation balloon-borne telescope. The Gigapixel Balloon-borne Imaging Telescope (GigaBIT) is designed to be a 1.35m wide-field, high resolution imaging telescope, with specifications to extend the scale and capabilities beyond those of its predecessor SuperBIT. A description and analysis of the SuperBIT FGS will be presented along with methodologies for extrapolating this data to enhance GigaBIT’s FGS design and fine pointing control algorithm. We employ a systems engineering approach to outline and formalize the design constraints and specifications for GigaBIT’s FGS. GigaBIT, building on the SuperBIT legacy, is set to enhance high-resolution astronomical imaging, marking a significant advancement in the field of balloon-borne telescopes.
Taurus is a balloon-borne cosmic microwave background (CMB) experiment optimized to map the E-mode polarization and Galactic foregrounds at the largest angular scales (𝓁 < 30) and improve measurements of the optical depth to reionization (τ). This will pave the way for improved measurements of the sum of neutrino masses in combination with high-resolution CMB data while also testing the ΛCDM model on large angular scales and providing high-frequency maps of polarized dust foregrounds to the CMB community. These measurements take advantage of the low-loading environment found in the stratosphere and are enabled by NASA’s superpressure balloon platform, which provides access to 70% of the sky with a launch from Wanaka, New Zealand. Here we describe a general overview of Taurus, with an emphasis on the instrument design. Taurus will employ more than 10,000 100mK transition edge sensor bolometers distributed across two low-frequency (150, 220GHz) and one high-frequency (280, 350GHz) dichroic receivers. The liquid helium cryostat housing the detectors and optics is supported by a lightweight gondola. The payload is designed to meet the challenges in mass, power, and thermal control posed by the super-pressure platform. The instrument and scan strategy are optimized for rigorous control of instrumental systematics, enabling high-fidelity linear polarization measurements on the largest angular scales.
The Super Pressure Balloon-borne Imaging Telescope (SuperBIT) is a diffraction limited 0.5m optical-to-near-UV telescope launched from New Zealand on NASA’s Super Pressure Balloon (SPB) on April 16, 2023 and flew for 45 nights. There were several communication links used during SuperBIT’s flight to communicate with the telescope from the ground, including Starlink, the Tracking and Data Relay Satellite System (TDRSS), Pilot, and Iridium. While Starlink bandwidth was suitable for TCP-based communications and downlinking, the other links were only capable of supporting UDP-based communications. We designed a file transfer algorithm that downlinked files while detecting missing packets in our downlink and requested them automatically, saving limited bandwidth. We also developed a similar mechanism to upload files as 200-byte commands to SuperBIT. In addition to the downlink and uplink programs, we also created an “autopilot” program to automate observations based on the location, time, and a prioritized list of targets. In this paper, we discuss the communication and observation challenges that were faced and strategies we used to overcome these challenges while operating SuperBIT.
SPIDER is a balloon-borne instrument designed to map the cosmic microwave background at degree-angular scales in the presence of Galactic foregrounds. Spider has mapped a large sky area in the Southern Hemisphere using more than 2000 transition-edge sensors (TESs) during two NASA Long Duration Balloon flights above the Antarctic continent. During its first flight in January 2015, Spider observed in the 95 GHz and 150 GHz frequency bands, setting constraints on the B-mode signature of primordial gravitational waves. Its second flight in the 2022-23 season added new receivers at 280 GHz, each using an array of TESs coupled to the sky through feedhorns formed from stacks of silicon wafers. These receivers are optimized to produce deep maps of polarized Galactic dust emission over a large sky area, providing a unique data set with lasting value to the field. In this work, we describe the instrument’s performance during SPIDER’s second flight.
The upcoming balloon-borne imaging telescope, GigaBIT, is a three-mirror anastigmat (TMA) system with a 1.35-m primary mirror designed to perform wide-field imaging with diffraction limited resolutions in the near ultraviolet (NUV) over a 0.8-deg field of view. An in-flight alignment procedure is being developed that incorporates many techniques novel to ballooning. First, coarse rigid-body adjustments are accomplished through feedback of combined laser rangefinder and retroreflector measurements between the three mirrors. Next, rigid-body adjustments are accomplished using the field-distortion estimated misalignment of each mirror. Lastly, any residual wavefront error of the entire system is compensated by a deformable primary with a set of force actuators. As every step of the procedure will be automated, significant time reduction can be achieved from hours to mere minutes, saving precious time for scientific observations. This paper details the models and simulation results involved in the steps of the procedure.
The BLAST Observatory is a proposed super-pressure balloon-borne polarimeter designed for a future ultra- long duration balloon campaign from Wanaka, New Zealand. To maximize scientific output while staying within the stringent super-pressure weight envelope, BLAST will feature new 1.8m off-axis optical system contained within a lightweight monocoque structure gondola. The payload will incorporate a 300 L 4He cryogenic receiver which will cool 8,274 microwave kinetic inductance detectors (MKIDs) to 100mK through the use of an adiabatic demagnetization refrigerator (ADR) in combination with a 3He sorption refrigerator all backed by a liquid helium pumped pot operating at 2 K. The detector readout utilizes a new Xilinx RFSOC-based system which will run the next-generation of the BLAST-TNG KIDPy software. With this instrument we aim to answer outstanding questions about dust dynamics as well as provide community access to the polarized submillimeter sky made possible by high-altitude observing unrestricted by atmospheric transmission. The BLAST Observatory is designed for a minimum 31-day flight of which 70% will be dedicated to observations for BLAST scientific goals and the remaining 30% will be open to proposals from the wider astronomical community through a shared-risk proposals program.
In this work we describe upgrades to the Spider balloon-borne telescope in preparation for its second flight, currently planned for December 2021. The Spider instrument is optimized to search for a primordial B-mode polarization signature in the cosmic microwave background at degree angular scales. During its first flight in 2015, Spider mapped ~10% of the sky at 95 and 150 GHz. The payload for the second Antarctic flight will incorporate three new 280 GHz receivers alongside three refurbished 95- and 150 GHz receivers from Spider's first flight. In this work we discuss the design and characterization of these new receivers, which employ over 1500 feedhorn-coupled transition-edge sensors. We describe pre-flight laboratory measurements of detector properties, and the optical performance of completed receivers. These receivers will map a wide area of the sky at 280 GHz, providing new information on polarized Galactic dust emission that will help to separate it from the cosmological signal.
Balloon-borne astronomy is a unique tool that allows for a level of image stability and significantly reduced atmospheric interference without the often prohibitive cost and long development time-scale that are characteristic of space-borne facility-class instruments. The Super-pressure Balloon-borne Imaging Telescope (SuperBIT) is a wide-field imager designed to provide 0.02" image stability over a 0.5 degree field-of-view for deep exposures within the visible-to-near-UV (300-900 um). As such, SuperBIT is a suitable platform for a wide range of balloon-borne observations, including solar and extrasolar planetary spectroscopy as well as resolved stellar populations and distant galaxies. We report on the overall payload design and instrumentation methodologies for SuperBIT as well as telescope and image stability results from two test flights. Prospects for the SuperBIT project are outlined with an emphasis on the development of a fully operational, three-month science flight from New Zealand in 2020.
Balloon-borne experiments present unique thermal design challenges, which are a combination of those present for both space and ground experiments. Radiation and conduction are the predominant heat transfer mechanisms with convection effects being minimal and difficult to characterize at 35-40 km. This greatly constrains the thermal design options and makes predicting flight thermal behaviour very difficult. Due to the limited power available on long duration balloon flights, efficient heater control is an important factor in minimizing power consumption. SuperBIT, or the Super-Pressure Balloon-borne Imaging Telescope, aims to study weak gravitational lensing using a 0.5m modified Dall-Kirkham telescope capable of achieving 0.02" stability1 and capturing deep exposures from visible to near UV wavelengths. To achieve the theoretical stratospheric diffraction-limited resolution of 0.25",2 mirror deformation gradients must be kept to within 20 nm. The thermal environment must be stable on time scales of an hour and the thermal gradients on the telescope must be minimized. During its 2018 test-flight, SuperBIT will implement two types of thermal parameter solvers: one for post-flight characterization and one for in-flight control. The payload has 85 thermistors as well as pyranometers and far-infrared sensors which will be used post-flight to further understand heat transfer in the stratosphere. This document describes the in-flight thermal control method, which predicts the thermal circuit of components and then auto-tunes the heater PID gains. Preliminary ground testing shows the ability to control the components to within 0.01 K.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.