We report on processing crystalline silicon with ultrashort laser pulses. Careful analysis of the nonlinear interaction process allows to inscribe waveguides in a longitudinal writing geometry. The origin of the waveguiding structures is due to a disturbed crystal structure with a cross section closely matching the focal size of the inscribing laser beam. Thermal annealing studies confirm that the strain from these defects and dislocations is responsible for the refractive index change. Improved control of nonlinear energy deposition paves the way to realize the transversal writing regime. Other applications like welding or localized amorphization will be highlighted as well.
Plasma, used as a terahertz (THz) detection medium has promising features. Several studies for mm-wave/THz radiation detection using various kind of methods for plasma creation such as neon indicator lamps [1], gas cells [2] and laser-induced air plasma [3] have been conducted. The interaction between the plasma and various frequency EM waves are still being investigated and in the mm-wave/terahertz range the interaction mechanism is still not well understood.
In this study a home-built gas chamber with variable electrode separation is studied using a continuous wave mm-wave/THz measurement systems. A breakdown is induced in gas mixture by applying a bias DC voltage to the electrodes and under sufficient conditions the modulated incident radiation can generate variations in the plasma current which can be measured electronically. The main mechanism of detection is the addition of the electric field of the incident EM radiation to the DC bias field, increasing the total electric field thus excitation collisions. Therefore the EM field is expected to effect the rate of ionization and excitation collisions at most at the regions with maximum total electron energy that is around the cathode dark space [4]. Depending on the orientation of its polarization, the incident EM radiation can also diffuse the signal electrons to the walls of the chamber giving rise to a negative change in bias current, decreasing the signal. Therefore the internal signal gain depends on the electrode geometry and polarization of radiation besides other parameters of the plasma.
Several parameters, such as gas pressure, gas species, discharge current, electrode spacing and electrode geometry effect the plasma-THz interaction thus changing the responsivity of the device. The plasma – THz interaction is studied here using a VDI multiplied source (WR2.8AMC). Driven by a frequency tunable Yttrium Iron Garnett (YIG) oscillator the source was modulated electronically providing a frequency tunable output in the 82-125 GHz and 246-375 GHz frequency range by use of a passive tripler. For the gas chamber different gases and gas mixtures are used. Using a Penning mixture, which is a mixture of one type of another gas with miniscule amount of another gas which has a lower ionization voltage than the main gas, a breakdown voltage lower than that of both gases can be obtained. Measurement of changes in the plasma current are carried out for different incident radiation frequencies, different electrode geometries, various gas mixtures and different modulation frequencies.
New methods are being developed for efficient detection of terahertz waves. While many detection techniques show promise their commercial development is still limited due to the overall complexity and cost of the imaging system. Using commercially available neon indicator lamps the interaction mechanism between the glow plasma and the millimeter / THz wave is investigated in detail as a function of the device speed, sensitivity to frequency and polarization of the light. A lock-in amplifier was used to measure the response up to 90kHz when the GDD was placed at the focus of a 113GHz center frequency reconfigured Dielectric Resonating Oscillator (DRO) driven multiplied Schottky diode source. In addition the polarization sensitivity of the GDD was tested for two different scenarios whereby rotating the GDD the detected signal is observed to agree well with Malus’s Law for one particular orientation. Furthermore, the frequency dependent GDD-THz interactions are investigated using a 240-380 GHz tunable continuous wave radiation source. Employing both systems allow us to understand the response of GDDs with respect to modulation frequency, RF frequency and polarization orientation. Resonance effects, frequency sensitivity and geometrical structures of GDDs are studied for the purpose of obtaining better performance in THz-GDD interaction for applications including general THz wave detection and imaging.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.