PLATO (PLAnetary Transits and Oscillations of stars)1 is the M3 class ESA mission dedicated to the discovery
and study of extrasolar planetary systems by means of planetary transits detection. PLATO Payload Camera
units are integrated and vibrated at CSL before being TVAC tested for thermal acceptance and performance
verification at 3 different test facilities (SRON, IAS and INTA). 15 of the 26 Flight Cameras were integrated,
tested and delivered to ESA for integration by the Prime between June 2023 and June 2024, with the remaining
flight units to be tested by the end of 2024. In this paper, we provide an overview of our serial testing approach,
some of the associated challenges, key performance results and an up-to-date status on the remaining planned
activities.
PLATO (PLAnetary Transits and Oscillations of stars) is an M3 medium-class space mission in ESA’s Cosmic Vision program devoted to detecting and studying a large number of extrasolar planetary systems. Its launch is planned for the end of 2026 from Europe’s Spaceport in French Guiana. The PLATO Payload consists of 26 wide field-of-view Cameras, each observing a specific part of the sky, associated data processing units and power supply units. The 24 Normal-Cameras will provide a very high-resolution photometric measurement of light from a large number of stars, while the other two Fast Cameras will provide the colour information and will deliver the pointing data to the AOCS (Attitude and Orbital Control System). The Cameras will be integrated into an optical bench. Each of them is composed of the Telescope Optical Unit (TOU), the Focal Plane Assembly (FPA) and the Front-End Electronics (FEE). Currently, the serial production of the Cameras has already started facing critical key points, non-conformities and challenging problems. The status of the Product Assurance activities during the serial production for which the first flight models are being delivered after the AIT phase is reported.
We present the design and performance of the XRISM Soft X-Ray Spectrometer Resolve, successfully launched on a JAXA H-IIA rocket September 7, 2023. The instrument uses a 36-pixel array of microcalorimeters at the focus of a grazing-incidence x-ray mirror. The instrument has achieved an energy resolution of 4.5 eV (FWHM) at 6. The overall cooling chain was designed to provide a lifetime of at least 3 years in orbit and operate without liquid helium to provide redundancy and the longest operational lifetime for the instrument. Early indications that the cryogen lifetime will exceed 4 years. X-rays are focused onto the array with a high-throughput grazing incidence X-ray Mirror Assembly with over 200 nested two-stage X-ray reflectors. A series of onboard X-ray calibrations sources allow simultaneous energy scale calibration lines simultaneously while observing celestial sources. The inflight performance of Resolve will be described along with a summary of the scientific capabilities.
The initial on-orbit checkout of the soft X-ray spectroscopic system on board the XRISM satellite is summarized. The satellite was launched on September 6, 2023 (UT) and has been undergoing initial checkout since then. Immediately after the launch, the cryocoolers were turned on and their operation was established. The first cycle of the adiabatic demagnetization refrigerator was performed on Oct. 9th, 2023, to transition the sensor to steady-state operational temperature conditions. Subsequently, the filter wheel, which supports energy calibration, was started up. The energy scale is highly sensitive to the temperature environment around the sensor and its analog electronics. The gain correction was established by referring to the calibration X-ray line. For an optimization of the cooler frequencies, we took data including the noise spectra by scanning the cooler frequencies, and selected a good frequency pair in the on-orbit environment. At the last stage of the checkout, the gate valve, which protects the inside of the Dewar from outside air pressure at launch, was attempted to be opened to bring the system to a state where it is ready for regular operations but was failed.
The Resolve soft X-ray spectrometer is the high spectral resolution microcalorimeter spectrometer for the XRISM mission. In the beam of Resolve there is a filter wheel containing X-ray filters. Also in the beam is an active calibration source (the modulated X-ray source (MXS) which can provide pulsed X-rays to facilitate gain calibration.
The filter wheel consists of 6 filter positions. Two open positions, one 55Fe source to aid in early mission spectrometer characterisation and three transmission filters: a neutral density filter, an optical blocking filter and a beryllium filter.
The X-ray intensity, pulse period and pulse separation of the MXS are highly configurable. Furthermore, the switch–on time is synchronized with the space–craft’s internal clock to give accurate start and end times of the pulses.
One of the issues raised during ground testing was the susceptibility of an MXS at high voltage to ambient light. Although measures were taken to mitigate the light leak, the efficacy of those measures must be verified in–orbit. Along with an overview of issues raised during ground testing, this article will discuss the calibration source and the filter performance in–flight and compare with the transmission curves present in the Resolve calibration database.
The X-Ray Imaging and Spectroscopy Mission (XRISM) project at JAXA officially started in 2018. Following the development of onboard components, the proto-flight test was conducted from 2021 to 2023 at JAXA Tsukuba Space Center. The spacecraft was launched from JAXA Tanegashima Space Center on September 7, 2023 (JST), and onboard components, including the science instruments, were activated during the in-orbit commissioning phase. Following the previous report in 2020, we report the spacecraft ground tests, the launch operation, in-orbit operations, and the status and plan of initial and subsequent guest observations.
Resolve is the instrument that utilizes an X-ray micro-calorimeter array onboard the XRISM (X-Ray Imaging and Spectroscopy Mission), which was launched on September 6 (UT), 2023. It fully met the spectral performance requirement (7 eV at 6 keV) both on the ground and in orbit and was confirmed to have the same performance as the SXS onboard the ASTRO-H (Hitomi) satellite. The detectors are operated at a low temperature of 50 mK to achieve the required energy resolution with the cooling system to satisfy the lifetime requirement of over 3 years. The cooling system is equipped with a 3-stage ADR and superfluid liquid He (LHe) as the heat sink for the ADR. The Joule-Thomson cooler unit and 2-stage Stirling cooler units are adopted to reduce heat load to the LHe. In the pre-launch operations, we carried out the low-temperature LHe top-off operation. The resultant amount of liquid He was over 35 L at the launch, which is sufficient to meet the lifetime requirement. During the post-launch operation, the LHe vent valve was opened five minutes after launch during the rocket acceleration, and the cryocoolers started in several revolutions as planned which established stable cooling of the dewar.
Proposed for a late 2031 launch, PRIMA, the Probe far-Infrared Mission for Astrophysics, closes the gap between JWST and ALMA, offering unprecedented sensitivity and spectroscopic mapping capability in the 24-264 μm range for detailed studies of galactic evolution, planetary atmospheres, and dust-metal dynamics. Onboard PRIMA, the PRIMAger camera operates in the 25-80 μm bands utilizing advanced MKID detector modules for hyperspectral imaging enabled by Linear Variable Filters. This paper presents a graded resonant metal-mesh filter technology, demonstrating very promising efficiency in the short wavelength range. Overcoming dielectric loss limitations, an innovative dual-layer LVF design on thin membranes achieves a transmission of 80-90% at 12 THz. Rigorous electromagnetic modeling, optimization, and position-dependent spectral response measurements validate the filter performance. We present a comprehensive set of simulation and experimental results, including environmental pre-qualification tests, strongly supporting the suitability of this technology for future space applications.
The resolve instrument onboard the X-Ray Imaging and Spectroscopy Mission (XRISM) consists of an array of 6 × 6 silicon-thermistor microcalorimeters cooled down to 50 mK and a high-throughput x-ray mirror assembly (XMA) with a focal length of 5.6 m. XRISM is a recovery mission of ASTRO-H/Hitomi, and the Resolve instrument is a rebuild of the ASTRO-H soft x-ray spectrometer (SXS) and the Soft X-ray Telescope (SXT) that achieved energy resolution of ∼5 eV FWHM on orbit, with several important changes based on lessons learned from ASTRO-H. The flight models of the Dewar and the electronics boxes were fabricated and the instrument test and calibration were conducted in 2021. By tuning the cryocooler frequencies, energy resolution better than 4.9 eV FWHM at 6 keV was demonstrated for all 36 pixels and high resolution grade events, as well as energy-scale accuracy better than 2 eV up to 30 keV. The immunity of the detectors to microvibration, electrical conduction, and radiation was evaluated. The instrument was delivered to the spacecraft system in 2022-04 and is under the spacecraft system testing as of writing. The XMA was tested and calibrated separately. Its angular resolution is 1.27′ and the effective area of the mirror itself is 570 cm2 at 1 keV and 424 cm2 at 6 keV. We report the design and the major changes from the ASTRO-H SXS, the integration, and the results of the instrument test.
This paper describes the design progress of the X ray Integral Field Unit Focal Plane Assembly (X-IFU FPA) for the Athena X-ray observatory. Test results obtained from the Development Model (DM) program are compared to existing numerical models. From these comparisons input to the next FPA Engineering Model (EM) is derived. Measurements have been done to assess the magnetic shielding performance and key thermal properties are verified. A dedicated configuration is used to verify the changes in mechanical dynamic behavior between ambient temperature and after cool-down to assess micro-vibration susceptibility. We conclude with a summary and outlook for the FPA-EM design.
The X-Ray Imaging and Spectroscopy Mission (XRISM) is the successor to the 2016 Hitomi mission that ended prematurely. Like Hitomi, the primary science goals are to examine astrophysical problems with precise highresolution X-ray spectroscopy. XRISM promises to discover new horizons in X-ray astronomy. XRISM carries a 6 x 6 pixelized X-ray micro-calorimeter on the focal plane of an X-ray mirror assembly and a co-aligned X-ray CCD camera that covers the same energy band over a large field of view. XRISM utilizes Hitomi heritage, but all designs were reviewed. The attitude and orbit control system were improved in hardware and software. The number of star sensors were increased from two to three to improve coverage and robustness in onboard attitude determination and to obtain a wider field of view sun sensor. The fault detection, isolation, and reconfiguration (FDIR) system was carefully examined and reconfigured. Together with a planned increase of ground support stations, the survivability of the spacecraft is significantly improved.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.