This will count as one of your downloads.
You will have access to both the presentation and article (if available).
CHEOPS, the ESA mission for exo-planets characterization: early operations and commissioning results
The paper summarises the results of the most recent ESA internal study activities, leading to an updated mission configuration, with a mirror and a detector spacecraft flying in formation around L2 and a consolidated scientific payload design. The paper also describes the ongoing technology development activities for the payload and for the spacecraft that will play a crucial role in case ESA would decide to develop such a mission.
The telescope’s mirrors M1, M2 as well as the focal plane detector are supported by a thermally controlled CFRP structure suspended on isostatic mounts. The dimensional stability of the structural system supporting the optics is a key requirement as it directly impacts the instrument’s accuracy. The M1 and M2 mirrors are supported by a tubular CFRP telescope design which has been optimized by analyses down to carbon fibre layer level with the support of extensive sample test results for model correlation and accurate dimensional stability predictions. This sample characterization test campaign has been conducted on samples with different carbon fibre layups (orientation and stack sequence) to measure accurately the Coefficient of Thermal Expansion (CTE) over a wide temperature range extending from -80°C to +80°C. Using the correlated Finite Element Model, the fibre orientation layup that minimized the relative displacement between the M1 and M2 mirrors, including the consideration of the thermo-elastic contributions of the isostatic mounts on the overall stability of this optical system, has been identified and selected for the baseline design of the CHEOPS Structure.
A dedicated Structural and Thermal Model (STM2), which was then refurbished to a PFM, was manufactured and tested with an ad hoc setup to verify the overall structural stability of the optical train assembly [2]. The relative distance between M1 and M2 was measured under thermal vacuum conditions using laser interferometer techniques. Thermal cycling tests were initially conducted to eliminate and characterize settling effects. Then, the structure’s stability was measured at three stabilised operational temperatures: -5, -10 and -15°C. The thermally induced M1-M2 misalignment on the optical axis was measured to be between -0.156 and -0.168 micron/°C. Relative mirror tilt and lateral centre shifts were also measured. The obtained focal distance, tilt and centre shift stability between mirrors M1 and M2 were all compliant with the system level requirements such that both an STM and PFM model of the CHEOPS CFRP Structure were successfully qualified and delivered in due time for integration on the spacecraft.
Future high energy astrophysics missions will require high performance novel X-ray optics to explore the Universe beyond the limits of the currently operating Chandra and Newton observatories. Innovative optics technologies are therefore being developed and matured by the European Space Agency (ESA) in collaboration with research institutions and industry, enabling leading-edge future science missions.
Silicon Pore Optics (SPO) [1 to 21] and Slumped Glass Optics (SGO) [22 to 29] are lightweight high performance X-ray optics technologies being developed in Europe, driven by applications in observatory class high energy astrophysics missions, aiming at angular resolutions of 5” and providing effective areas of one or more square meters at a few keV.
This paper reports on the development activities led by ESA, and the status of the SPO and SGO technologies, including progress on high performance multilayer reflective coatings [30 to 35]. In addition, the progress with the X-ray test facilities and associated beam-lines is discussed [36].
View contact details
No SPIE Account? Create one
