Freeform optics provide excellent performance for a wide variety of applications. However, obtaining an accurate freeform surface measurement is highly challenging due to its large aspheric/freeform departure. It has been proven that SCOTS (Software Configurable Optical Test System), an advanced deflectometry system developed at the University of Arizona, can measure the departure of a freeform surface from the desired shape with nanometer accuracy. Here, a new data processing technique was used to measure a freeform surface without any prior knowledge of the shape of the surface. Knowing only the geometry of one point on the test surface, this method can take a blind measurement of a freeform surface and arrive at the true surface through iterative construction.
Daniel K. Inouye Solar Telescope (formerly known as Advanced Technology Solar Telescope) will be the largest optical solar telescope ever built to provide greatly improved image, spatial and spectral resolution and to collect sufficient light flux of Sun. To meet the requirements of the telescope the design adopted a 4m aperture off-axis parabolic primary mirror with challenging specifications of the surface quality including the surface figure, irregularity and BRDF. The mirror has been completed at the College of Optical Sciences in the University of Arizona and it meets every aspect of requirement with margin. In fact this mirror may be the smoothest large mirror ever made.
This paper presents the detail fabrication process and metrology applied to the mirror from the grinding to finish, that include extremely stable hydraulic support, IR and Visible deflectometry, Interferometry and Computer Controlled fabrication process developed at the University of Arizona.
The Software Configurable Optical Testing System (SCOTS) is one of the newest testing methods for large mirror surfaces. The Integrated Ray Tracing (IRT) technique can be applicable to the SCOTS simulation by performing non-sequential ray tracing from the screen to the camera detector in the real scale. Therefore, the radiometry of distorted pattern images are numerically estimated by the IRT simulation module. In this study, we construct an IRT SCOTS simulation model for the Fast Steering Mirror Prototype (FSMP) surface of the Giant Magellan Telescope (GMT). GMT FSMP is an off-axis ellipsoidal concave mirror that is 1064 mm in diameter and has PV 3.1 mm in aspheric departure. The surface error requirement is less than 20 nm rms. The screen is modeled as an array of 1366 by 768 screen pixels of 0.227 mm in pitch size. The screen is considered as a Lambertian scattering surface. The screen and the camera are positioned around 4390 mm away from the mirror and separated by around 132 mm from each other. The light source are scanning lines and sinusoidal patterns generated by 616,050 rays per one screen pixel. Of the initially generated rays, 0.22 % are received by the camera’s detector and contribute to form distorted pattern images. These images are converted to the slope and height maps of the mirror surface. The final result for the height difference between input surface and reconstructed surface was 14.14 nm rms. Additionally, the simulated mirror pattern image was compared with the real SCOTS test for the GMT FSMP. This study shows applicability of using the IRT model to SCOTS simulation with nanometer level numerical accuracy.
SCOTS (Software Configurable Optical Test System) is a high-precision slope measurement technique based on deflectometry. It utilizes a well-calibrated commercial LCD screen and a diffraction-limited camera to provide high dynamic range, non-contact and full-field metrology of reflective/refractive optics of high accuracy but low cost. Recently, we applied this metrology method on the fabrication of the primary mirror of Daniel K. Inouye Solar Telescope (DKIST), which is a 4.2 meter off-axis parabolic segment with more than 8 mm peak-to-valley aspheric departure. Sophisticated calibrations and compensations including camera mapping, screen nonlinearity and screen shape deformation are performed to achieve high accuracy measurement results. By measuring the mirror at different orientations, non-symmetrical systematic errors are eliminated. The metrology system also includes dual cameras that provide self- verification test. The measurement results are being used to guide the fabrication process.
The Software Configurable Optical Test System (SCOTS) uses deflectometry to measure surface slopes of general optical shapes without the need for additional null optics. Careful alignment of test geometry and calibration of inherent system error improve the accuracy of SCOTS to a level where it competes with interferometry. We report a SCOTS surface measurement of an off-axis superpolished elliptical x-ray mirror that achieves <1 nm root-mean-square accuracy for the surface measurement with low-order term included.
We present our analysis methodology for a 20.3 cm prototype optical tracker to determine why instabilities occur below 50 Hz and suggest improvements. The Navy Precision Optical Interferometer makes use of six small optical telescope stations spaced along a Y-array to synthesize an equivalent single larger telescope. Piezoelectric-driven optical trackers steer 12.5 cm output beams from each station to an optics laboratory up to 700 m distant. A percentage of this starlight is split off and used in a closed-loop feedback to update the pointing of the telescope and steering of the tracker. Steering stabilizes atmospheric induced beam trajectory deviations, required for fringe generation. Because of closedloop feedback, we require all fundamental frequencies to be at least 3 times the desired operational frequency, or 150 Hz. These trackers are modified commercial aluminum gimbal mounts with flex-pivot axles and very small damping ratio. Steering is tip/tilt mirror rotation by push-only actuators and a return spring. It is critical contact be maintained between actuator, mirror mount and return spring. From our dynamic analysis, the 122 N return spring is 2.9 times that required, and has a natural frequency equal to 238 Hz. The range of steering, 140 microradian, is double that required and the 0.077 microradian precision is 2.6 times that required. The natural frequency of the tracker is 66 Hz and the tuned closed-loop operational frequency is only 22 Hz. We conclude the low fundamental frequency of the mount limits its performance below 50 Hz and stiffening the structure is required.
The software configurable optical test system (SCOTS) is an efficient metrology technology based on reflection deflectometry that uses only a liquid-crystal display and a camera to measure surface slope. The surface slope is determined by triangulation using the co-ordinates of the display screen, camera, and test mirror. We present our SCOTS test results concentrated on high dynamic range measurements of low order aberrations. The varying astigmatism in the 910-mm diameter aspheric deformable secondary mirror for the large binocular telescope was measured with SCOTS, requiring no null corrector. The SCOTS system was designed on-axis with camera and screen aligned on the optical axis of the test mirror with the help of a 6-inch pellicle beam splitter. The on-axis design provides better control of the astigmatism in the test. The high dynamic range of the slope provided a measurement of astigmatism within 0.2-μm root-mean-square accuracy in the presence of 231-μm peak-to-valley aspheric departure. The simplicity of the test allowed the measurements to be performed at multiple gravity angles.
Large telescope mirrors are typically measured using interferometry, which can achieve measurement accuracy of a few nanometers. However, applications of interferometry can be limited by small dynamic range, sensitivity to environment, and high cost. We have developed a range of surface measurement solutions using SCOTS, the Software Configurable Optical Test System, which illuminates the surface under test with light modulated from a digital display or moving source. The reflected light is captured and used to determine the surface slope which is integrated to provide the shape. A range of systems is presented that measures nearly all spatial scales and supports all phases of processing for large telescope mirrors.
A software configurable optical test system (SCOTS) based on deflectometry was developed at the University of Arizona for rapidly, robustly, and accurately measuring precision aspheric and freeform surfaces. SCOTS uses a camera with an external stop to realize a Hartmann test in reverse. With the external camera stop as the reference, a coordinate measuring machine can be used to calibrate the SCOTS test geometry to a high accuracy. Systematic errors from the camera are carefully investigated and controlled. Camera pupil imaging aberration is removed with the external aperture stop. Imaging aberration and other inherent errors are suppressed with an N -rotation test. The performance of the SCOTS test is demonstrated with the measurement results from a 5-m-diameter Large Synoptic Survey Telescope tertiary mirror and an 8.4-m diameter Giant Magellan Telescope primary mirror. The results show that SCOTS can be used as a large-dynamic-range, high-precision, and non-null test method for precision aspheric and freeform surfaces. The SCOTS test can achieve measurement accuracy comparable to traditional interferometric tests.
SCOTS is a high precision slope measurement technology based on deflectometry. Light pattern on a LCD display
illuminates the test surface and its reflected image is used to calculate the surface slope. SCOTS provides a high
dynamic range full field measurement of the optics without null optics required.
We report SCOTS tests on X-ray mirrors to nm and even sub nm level with precise calibration of the test system. A
LCD screen with dots/check board pattern was aligned into the system at the test mirror position to calibrate camera
imaging distortion in-situ. System errors were further eliminated by testing and subtracting a reference flat which was
also aligned at the same position as the test mirror. A virtual reference based on the ideal shape of the test surface was
calculated and subtracted from the test raw data. This makes the test a ‘virtual null’ test. Two X-ray mirrors were tested
with SCOTS. 0.1μrad (rms) slope precision and sub nm (rms) surface accuracy were achieved.
The software configurable optical test system (SCOTS) is an efficient metrology technology based on reflection
deflectometry that uses only an LCD screen and a camera to measure surface slope. The surface slope is determined by
triangulations using the coordinates of the display screen, camera and test mirror. We present our recent SCOTS test
results concentrated on high dynamic range measurements of low order aberrations. The varying astigmatism in the 91
cm diameter aspheric deformable secondary mirror for the Large Binocular Telescope (LBT) was measured with
SCOTS, requiring no null corrector. The SCOTS system was designed on axis with camera and screen aligned on the
optical axis of the test mirror with the help of a 6 inch pellicle beam splitter. The on-axis design gives better control of
the astigmatism in the test. The high dynamic range of slope provided a measurement of astigmatism with 0.2 μm rms
accuracy in the presence of 231 μm peak-to-valley (PV) aspheric departure. The simplicity of the test allowed the
measurements to be performed at multiple elevation angles.
Absolute measurement with SCOTS/deflectometry is a calibration problem. We use a laser tracker to calibrate the test
geometry. The performance id demonstrated with the initial measurement results from the Large Synoptic Survey
Telescope tertiary mirror. Systematic errors from the camera are carefully controlled. Camera pupil imaging aberration is
removed with an external aperture stop. Imaging aberration and other inherent errors are suppressed with a rotation test.
Results show that the SCOTS can act as a large dynamic range, high precision, non-null test method for precision
aspheric optics. The SCOTS test can achieve measurement accuracy comparable with the traditional interferometric
testing.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.