Aspera is a NASA Pioneers SmallSat mission designed to detect and map the O VI emission (1032 Å) through long-slit spectroscopy in the halos of nearby galaxies for the first time. The spectrograph utilizes toroidal gratings with multilayer coatings of aluminum, lithium fluoride, and magnesium fluoride that optimize their throughput in the extreme ultraviolet EUV waveband of 1030 to 1040 Å. We discuss the grating verification test setup design, including optical alignment and reference measurement setup. We also present grating testing and grating efficiency simulation results using the target grating groove profile and the multi-layer coatings.
Aspera is a NASA Pioneers Mission designed to measure faint OVI emission around nearby galaxies with unprecedented sensitivity. The SmallSat payload consists of two identical co-aligned spectrographs, both operating in the Far Ultraviolet (FUV) between 1030−1040 Å. Missions operating at FUV wavelengths are particularly sensitive to contamination, as short wavelengths are easily scattered and absorbed by contaminants deposited on payload optical surfaces. A strict contamination control plan is critical to avoiding a severe loss in FUV throughput. Aspera contamination control efforts have been tailored to fit within the scope of a sub-Class D mission, a challenge that has become increasingly relevant as advances in FUV optics/detectors drive an uptick in smaller platform, contamination sensitive UV payloads. Contamination monitoring is used to audit the cleanroom environment, avoid outgassing contaminants under vacuum, and assess contaminant levels on payload optics. We present a detailed contamination budget through the mission end of life as well as our ongoing contamination monitoring efforts. We discuss protocols implemented for minimizing contamination-related performance degradation.
Aspera is a NASA-funded UV SmallSat mission designed to detect and map warm-hot phase halo gas around nearby galaxies. The Aspera payload is designed to detect faint diffuse O VI emission at around 103.2 nm, satisfying the sensitivity requirement of 5×10−19 erg/s/cm2/arcsec2 over 179 hours of exposure. In this manuscript, we describe the overall payload design of Aspera. The payload comprises two identical co-aligned UV long-slit spectrograph optical channels sharing a common UV-sensitive microchannel plate detector. The design delivers spectral resolution R ∼ 2,000 over the wavelength range of 101 to 106 nm. The field of view of each channel is 1 degree by 30 arcsec, with an effective area of 1.1 cm2. The mission is now entering the payload integration and testing phase, with the projected launch-ready date set for late 2025 or early 2026. The mission will be launched into low-Earth orbit via rideshare.
Aspera is a NASA Astrophysics Pioneers SmallSat mission designed to study diffuse Ovi emission from the warm-hot phase gas in the halos of nearby galaxies. Its payload consists of two identical Rowland Circle-type long-slit spectrographs, sharing a single MicroChannel plate detector. Each spectrograph channel consists of an off-axis parabola primary mirror and a toroidal diffraction grating optimized for the 1013-1057 Å bandpass. Despite the simple configuration, the optical alignment/integration process for Aspera is challenging due to tight optical alignment tolerances, driven by the compact form factor, and the contamination sensitivity of the Far-Ultraviolet optics and detectors. In this paper, we discuss implementing a novel multi-phase approach to meet these requirements using state-of-the-art optical metrology tools. For coarsely positioning the optics we use a blue-laser 3D scanner while the fine alignment is done with a Zygo interferometer and a custom computer-generated hologram. The detector focus requires iterative in-vacuum alignment using a Vacuum UV collimator. The alignment is done in a controlled cleanroom facility at the University of Arizona.
Aspera is a NASA-funded UV SmallSat Mission in development with a projected launch in 2025. The goal of the mission is to detect and map warm-hot gas in the circumgalactic medium of nearby galaxies traced by the Ovi emission line at 103.2 nm. To that goal, Aspera will conduct long-exposure observations at one or more spatial fields around each target galaxy, employing two long-slit spectrographs. Spectra from both channels are focused on a single micro-channel plate detector. In preparation of the mission’s launch, we are developing a data reduction pipeline, the goal of which is to reconstruct a calibrated 3D IFU-like data cube by combining the photon event lists obtained during each observation for a given target galaxy. In this proceedings paper, we present an outline for the data reduction pipeline and describe the data flow through the processing of science observations. We will further discuss individual steps to be applied to the data during the processing and show how our final data cubes shall be reconstructed. Finally, we will present our planned data products and discuss how simulations of the Aspera data cubes are being used to develop the pipeline.
Large-scale radio telescope projects will be important in answering modern astronomical questions like those of the National Academies' Astro2020 survey. We propose an efficient and cost-effective thermoforming process with fringe projection metrology (FPM) as an alternative to current panel fabrication methods. In our thermoforming process, we use a flexure plate with actuated tiles to create an adjustable mold inside an oven. Unshaped panels are placed on the adjustable mold and heat is applied, thermoforming the panel to the mold shape. This process allows for the rapid prototyping and production of many panel shapes with sufficient accuracy and reduced recurring costs. We apply FPM to evaluate the mold and panel shapes. FPM applies phase-shifted fiducial patterns, camera stereo vision, and triangulation to measure the thermoformed panel. We applied these technologies in beginning the construction of the Public Outreach Radio Telescope (PORT) and its off-axis dish of 26, 0.5 m2, 1/8" thick panels. The PORT is designed for 30dB of gain at λ = 21 cm wavelength, and the dish was toleranced to λ = 3 cm wavelength for future observations. In this proof of concept, we have installed thermoformed panels measured with FPM on a radio telescope.
Aspera is the UV small-satellite mission to detect and map the warm-hot phase gas in nearby galaxy halo. Aspera was chosen as one of NASA's Astrophysics Pioneers missions in 2021 and employs a FUV long-slit spectrograph payload, optimized for low-surface brightness O VI emission line detection at 103-104 nm. The mission incorporates state-of-the-art UV technologies such as high-efficiency micro-channel plates and enhanced LiF coating to achieve a high level of diffuse-source sensitivity of the payload, down to 5.0E-19 erg/s/cm^2/arcsec^2. The combination of the high sensitivity and a 1-degree by 30-arcsecond long-slit field of view enables efficient 2D mapping of diffuse halo gas through step and stare concept observation. Aspera is presently in the critical design phase, with an expected launch date in mid-2025. This work provides a current overview of the Aspera payload design.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.