This paper describes the design progress of the X ray Integral Field Unit Focal Plane Assembly (X-IFU FPA) for the Athena X-ray observatory. Test results obtained from the Development Model (DM) program are compared to existing numerical models. From these comparisons input to the next FPA Engineering Model (EM) is derived. Measurements have been done to assess the magnetic shielding performance and key thermal properties are verified. A dedicated configuration is used to verify the changes in mechanical dynamic behavior between ambient temperature and after cool-down to assess micro-vibration susceptibility. We conclude with a summary and outlook for the FPA-EM design.
In this article the immersed gratings for the ESA Copernicus Sentinel-5 mission are presented. The manufacturing approach is shown and the optical performance of the SWIR-3 immersed gratings as well as the results of the environmental tests are discussed. The immersed gratings show an average efficiency of 60% and a wavefront error of 200 nm rms. The total integrated scatter over the complete stray-light hemisphere excluding ghosts from internal reflections is found to be 0.2% using a conservative estimate. A method for the derivation of the wavefront error from separate surface measurements is presented and the results are compared to measurements with an experimental Shack- Hartmann setup. The immersed gratings are produced by bonding a prism to a wafer with a grating. Environmental tests and testing at operational temperatures show the suitability of this approach for complex space optical components. The article concludes with possible improvements in the optical performance of future immersed gratings.
The soft x-ray spectrometer was designed to operate onboard the Japanese Hitomi (ASTRO-H) satellite. In the beam of this instrument, there was a filter wheel containing x-ray filters and active calibration sources. This paper describes this filter wheel. We show the purpose of the filters and the preflight calibrations performed. In addition, we present the calibration source design and measured performance. Finally, we conclude with prospects for future missions.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.