I am a PhD researcher in the Faculty of Aerospace Engineering in TU Delft. My research is distributed fibre optic sensing for structural health monitoring.
Publications (4)
This will count as one of your downloads.
You will have access to both the presentation and article (if available).
The colour of the ground layers of a painting has an influence on its visual appearance. In addition to the commonly used white ground layers, other colour ground layers have been used, for example, the grey ground layer used in Peter Paul Rubens’s painting Portrait of Clara Serena Rubens helps the colour transition of the skin tones. Understanding the effects caused by the colours of the ground layers is of significance for both technical art history and conservation. Optical non-destructive testing (NDT) techniques are useful tools for the investigation of paintings, for example, optical coherence tomography (OCT) can be used to study the surface and subsurface layers non-destructively. In this work, the interaction of light with paint and ground layers is modelled to supplement OCT measurements of paintings with ground layers. A previously described near infrared light range OCT system provides high spatial and depth resolution measurements. A four-flux model has been developed for analysing the light interaction in the paint and ground layers. This model considers forwards propagating collimated light, backwards-propagating collimated light, forwards-propagating diffuse light and backwards-propagating diffuse light. The model uses the optical material properties, including refractive index (RI), absorption and layer thickness, as input. This paper describes the construction of the model and an evaluation of its performance by comparison with OCT data.
Nanoparticle doped optical fibres are a new topic of interest in fibre optic strain sensing. In our current work, we find that the plasmon resonance spectral peak shift of embedded gold NPs can be used as a novel strain detection method. When the refractive index change of the optical fibre under strain change is close to zero, the shape change induced plasmon resonance spectral peak shift will become quite important. In this work, we analysed the plasmon resonance spectral peak shift only caused by NP morphing for gold NPs diameters from 10 nm to 400 nm based on the T-matrix method on the high performance computing cluster.
This study forms a part of the research in using nanoparticles (NPs) to increase the intensity of light scattering signal in the optical fibres. Increasing the intensity of the backscattered light signal in the optical fibres shows the potential to increase the signal-to-noise ratio in order to improve the sensitivity of the backscatter reflectometry. Doping NPs into the optical fibres can greatly increase the scattered light. However, it is not easy to manufacture NP-doped optical fibres to test different designs. To overcome this problem, in our former work we used the method of dropping refractive index matching liquid containing gold NPs at the optical fibres end tips to investigate the intensity change of the scattered light from the interfaces. In this paper, some new initial experimental results for the scattered light between the optical fibre end tips are shown. Gold NPs have been mixed into the optical adhesive (Norland) and is then dropped and cured at the optical fibre end tips. A backscatter reflectometer (LUNA ODiSI-B) was used in the experiment to measure the intensity of scattered light distribution between the optical fibre end tips. We investigated 4 cases of light scattering between the optical fibre end tips: (i) the backscattered light intensity distribution in the case of the air gap between the optical fibre end tips; (ii) the backscattered light intensity distribution with optical adhesive between the optical fibre end tips; (iii) the backscattered light intensity distribution with optical adhesive containing gold NPs (gold nanopowder (<100 nm), Sigma Aldrich) between the optical fibre end tips before curing process and (iv) the backscattered light intensity distribution with optical adhesive containing gold NPs between the optical fibre end tips after the curing process. Our initial findings are that the scattered light by gold NPs at the optical fibre interfaces can be detected by the backscatter reflectometer. By obtaining the differential signal between the distributed light scattering by cured optical adhesive containing gold NPs and only optical adhesive between the optical fibre end tips, the light scattered by the gold NPs has be determined.
This study forms the first part of research into enhancing the forward and back scattering of light in an optical fibre using nanoparticles (NPs). This approach has the potential to enhance the sensitivity of optical fibre sensing by increasing the signal-to-noise ratio. The work described in this paper is focused on understanding the scattering of light by a suspension of NPs in refractive index matching liquid. It was noted early in the experimental work that rheological effects related to the viscosity and flow of the liquid affect the scattered light measured and therefore these effects are considered in the analysis. Gold nanoparticles in the tens to hundreds of micrometre size range were selected as the scattering particles based on their optical properties. These are suspended in a refractive index liquid with a similar refractive index to the optical fibre core. Effort was needed to transfer the NPs from their aqueous sodium citrate solution to the paraffin based solution. We investigated two types of interaction with the optical fibre: (i) dropping the NP suspension onto the end of a single-mode optical fibre and (ii) using the NP suspension as an interface between two single-mode optical fibres. It was noted that the surface tension of the liquid, the diameter of the fibre and the spacing between the fibres in case (ii) influence the reflected and transmitted light. In case of excess liquid, droplets flowed down the fibre and interestingly in case (ii) modified the reflected and forward transmitted light as it passed across the fibre interface. Our initial findings are that the influence of the gap between two optical fibres decreased after dropping refractive index liquid into the gap after fibre collimation, which is a beneficial result for understanding the influence of scattered light from a liquid containing NPs. Note, the position between the two fibres can also change due to the weight of the droplet and the fibre ends had to be re-collimated to investigate the influence of the moving droplets. These results will be expanded by additional experiments and modelling of the scattering from the nanoparticales and droplets.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.