Paper
10 February 1981 Development Of A Compound Interlaced Grating For High Energy Laser Systems
C. Chi, C. Smith, M. Ogan, C. O'Bryan
Author Affiliations +
Abstract
In High Energy Laser (HEL) systems, there exist requirements for spectral beam splitting devices for purposes of beam control and diagnostics. This paper describes the development of one such aperture sharing component, called the Compound Interlaced (CI) diffraction grating. The CI grating is ruled such that a high frequency, visible to near IR wavelength grating is placed directly on top of a lower frequency, long wave IR grating. In a system configuration, the HEL beam is sampled with the long period ruling and directed toward a wavefront monitor or beam tilt sensor, while the specular reflection is sent through pointing optics to the target of interest. At the same time, shorter wavelength return energy from the target is sampled by the short period grating and is subsequently imaged by an appropriate sensor. Results of work completed to date show that indeed such a grating can be fabricated on a high power substrate and can yield enough efficiency for an operational environment. The paper addresses various design and fabrication issues including groove spacing and profile, blaze angles, apex angles, skew angles (of one ruling with respect to the other), sub-strate coatings and ruling techniques.
© (1981) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
C. Chi, C. Smith, M. Ogan, and C. O'Bryan "Development Of A Compound Interlaced Grating For High Energy Laser Systems", Proc. SPIE 0240, Periodic Structures, Gratings, Moire Patterns, and Diffraction Phenomena I, (10 February 1981); https://doi.org/10.1117/12.965668
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Diffraction gratings

Diffraction

Gold

Sensors

Moire patterns

Visible radiation

Ions

Back to Top