Paper
21 October 1986 Laser Cladding Of Cobalt-Base Powder On Stainless And Construction Steels
W Cerri, V Donati, O Fiorini, C A Be
Author Affiliations +
Proceedings Volume 0650, High Power Lasers and Their Industrial Applications; (1986) https://doi.org/10.1117/12.938106
Event: 1986 International Symposium/Innsbruck, 1986, Innsbruck, Austria
Abstract
Laser cladding tests have been performed using a high power CO2, laser realized by CISE. In this process a high power beam is focussed on the surface of the substrate to be cladded. The beam produces a surface melting while a powder flow, carried by an inert gas, is blown into the melt pool. The advantages of the laser cladding compared to the conventional cladding processes are the following: - effective metallurgical bonding between the cladded layer and the substrate with a very low heat transferred to the workpiece; - high hardness of the cladded layer with a low dilution without cracks or porosities; - less pre and post-process operations. Example of laser cladding tests of cobalt base powder on stainless austenitic and martensitic steels and on construction steels are reported.
© (1986) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
W Cerri, V Donati, O Fiorini, and C A Be "Laser Cladding Of Cobalt-Base Powder On Stainless And Construction Steels", Proc. SPIE 0650, High Power Lasers and Their Industrial Applications, (21 October 1986); https://doi.org/10.1117/12.938106
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cladding

Coating

Laser processing

Carbon

Cobalt

Interfaces

High power lasers

RELATED CONTENT

Advances In Laser Cladding Process Technology
Proceedings of SPIE (September 30 1985)
Study on residual stresses of Ni based WC coating by...
Proceedings of SPIE (January 17 2008)
Laser cladding
Proceedings of SPIE (November 14 2003)

Back to Top