Paper
16 July 2018 Phenotyping of sorghum panicles using unmanned aerial system (UAS) data
A. Chang, J. Jung, J. Yeom, M. Maeda, J. Landivar
Author Affiliations +
Abstract
Unmanned Aerial System (UAS) is getting to be the most important technique in recent days for precision agriculture and High Throughput Phenotyping (HTP). Attributes of sorghum panicle, especially, are critical information to assess overall crop condition, irrigation, and yield estimation. In this study, it is proposed a method to extract phenotypes of sorghum panicles using UAS data. UAS data were acquired with 85% overlap at an altitude of 10m above ground to generate super high resolution data. Orthomosaic, Digital Surface Model (DSM), and 3D point cloud were generated by applying the Structure from Motion (SfM) algorithm to the imagery from UAS. Sorghum panicles were identified from orthomosaic and DSM by using color ratio and circle fitting. The cylinder fitting method and disk tacking method were proposed to estimate panicle volume. Yield prediction models were generated between field-measured yield data and UAS-measured attributes of sorghum panicles.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
A. Chang, J. Jung, J. Yeom, M. Maeda, and J. Landivar "Phenotyping of sorghum panicles using unmanned aerial system (UAS) data", Proc. SPIE 10664, Autonomous Air and Ground Sensing Systems for Agricultural Optimization and Phenotyping III, 106640B (16 July 2018); https://doi.org/10.1117/12.2305099
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
RGB color model

3D modeling

Clouds

Data acquisition

Data modeling

3D image processing

Agriculture

Back to Top