ATHENA WFI optical blocking filters development status toward the end of the instrument phase-A

Marco Barbera; Ugo Lo Cicero; Luisa Sciortino; Fabio D'Anca; Giancarlo Parodi; Miroslaw Rataj; Szymon Polak; Adam Pilch; Norbert Meidinger; Salvatore Sciortino; Gregor Rauw; Graziella Branduardi Raymont; Teresa Mineo; Emanuele Perinati; Paolo Giglio; Alfonso Collura; Salvatore Varisco; Roberto Candia

doi:10.1117/12.2314448

6 July 2018 ATHENA WFI optical blocking filters development status toward the end of the instrument phase-A

Marco Barbera, Ugo Lo Cicero, Luisa Sciortino, Fabio D'Anca, Giancarlo Parodi, Miroslaw Rataj, Szymon Polak, Adam Pilch, Norbert Meidinger, Salvatore Sciortino, Gregor Rauw, Graziella Branduardi Raymont, Teresa Mineo, Emanuele Perinati, Paolo Giglio, Alfonso Collura, Salvatore Varisco, Roberto Candia

Author Affiliations +

Proceedings Volume 10699, Space Telescopes and Instrumentation 2018: Ultraviolet to Gamma Ray; 106991K (2018) https://doi.org/10.1117/12.2314448
Event: SPIE Astronomical Telescopes + Instrumentation, 2018, Austin, Texas, United States

Abstract

The Wide Field Imager (WFI) is one of the two instruments of the ATHENA astrophysics space mission approved by ESA as the second large mission in the Cosmic Vision 2015-2025 Science Programme. The WFI, based on a large array of depleted field effect transistors (DEPFET), will provide imaging in the 0.2-15 keV band over a 40’x40’ field of view, simultaneously with spectrally and time resolved photon counting. The WFI detector is also sensitive to UV/Vis photons, with an electron-hole pair production efficiency in the UV/VIS larger than that for X-ray photons. Optically generated photo-electrons may degrade the spectral resolution as well as change the energy scale by introducing a signal offset. For this reason, the use of X-ray transparent optical blocking filters (OBFs) are needed to allow the observation of X-ray sources that present a UV/Vis bright counterpart. The OBFs design is challenging since one of the two required filters is quite large (~ 160 mm × 160 mm), very thin (< 200 nm), and shall survive the mechanical load during the launch. In this paper, we review the main results of modeling and characterization tests of OBF partially representative samples, performed during the phase A study, to identify the suitable materials, optimize the design, prove that the filters can be launched in atmospheric pressure, and thus demonstrate that the chosen technology can reach the proper technical readiness before mission adoption.

Conference Presentation

Citation Download Citation

Marco Barbera, Ugo Lo Cicero, Luisa Sciortino, Fabio D'Anca, Giancarlo Parodi, Miroslaw Rataj, Szymon Polak, Adam Pilch, Norbert Meidinger, Salvatore Sciortino, Gregor Rauw, Graziella Branduardi Raymont, Teresa Mineo, Emanuele Perinati, Paolo Giglio, Alfonso Collura, Salvatore Varisco, and Roberto Candia "ATHENA WFI optical blocking filters development status toward the end of the instrument phase-A", Proc. SPIE 10699, Space Telescopes and Instrumentation 2018: Ultraviolet to Gamma Ray, 106991K (6 July 2018); https://doi.org/10.1117/12.2314448

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available