Paper
10 July 2018 Digital correlated double sampling CCD readout characterization
Author Affiliations +
Abstract
Charge Coupled Devices (CCD) are detectors widely used in astronomical observation due to their high sensitivity and high spatial resolution. The readout technique is often implemented with analog circuits. The main objective of our research is to replace the analog processing of a CCD signal with the realisation of digital processing. In doing so, low noise levels will be obtained while reducing the area and improving flexibility. Digital Correlated Double Sampling (DCDS) is a readout technique by which the CCD signal is oversampled many times allowing the CDS filter function to move from the traditional analog domain to the digital domain. Two digital processing systems have been tested using the DCDS readout technique by developing algorithms to analyze and process the digital samples taken from reading the CCD. These digital processing systems have low cost, low power and a compact package. An extensive CCD readout characterization based on Photon Transfer (PT) method has been carried out on a vacuum and controlled temperature conditions. It has also been confirmed using an Fe55 X-ray source. The power dissipation achieved is a high improvement with respect to the analog circuit and the noise values obtained are in concordance with the analog processing.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Carlos Cruz de la Torre and Juan de Vicente Albendea "Digital correlated double sampling CCD readout characterization", Proc. SPIE 10709, High Energy, Optical, and Infrared Detectors for Astronomy VIII, 1070920 (10 July 2018); https://doi.org/10.1117/12.2312498
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Charge-coupled devices

Analog electronics

Signal processing

Algorithm development

Digital signal processing

Field programmable gate arrays

Clocks

RELATED CONTENT

Design of the electronic system for a mini single CCD...
Proceedings of SPIE (August 29 2022)
A new AD device application in the CCD signal process...
Proceedings of SPIE (November 30 2012)
Itek Model 2KL Sensor The Mini Electro Optical Imaging...
Proceedings of SPIE (December 12 1981)
Analog Image Storage Using Charge-Coupled Devices
Proceedings of SPIE (December 12 1979)
AAO2: a general purpose CCD controller for the AAT
Proceedings of SPIE (September 29 2004)

Back to Top