Paper
25 September 2018 CARBO-The Carbon Observatory Instrument Suite: the next generation of Earth observing instruments for global monitoring of carbon gases
J. Kent Wallace, Charles E. Miller, Shannon Kian Zareh, Yuri Beregovski, Mayer Rud, Randall Bartos, James P. McGuire, Thomas S. Pagano, Daniel W. Wilson, Cynthia B. Brooks, Daniel T. Jaffe, Andre Wong, Didier Keymeulen, Peter Sullivan, Elliott Liggett, Michael Bernas, Amy Mainzer, Annmarie Eldering, Dejian Fu
Author Affiliations +
Abstract
The Carbon Observatory Instrument Suite, or CARBO, consists of four carbon observing instruments sharing a common instrument bus, yet targeted for a particular wavelength band each with a unique science observation. They are: a) Instrument 1, wavelength centered at 756 nm for oxygen and solar-induced chlorophyll fluorescence (SIF) observations, b) Instrument 2, centered at 1629 nm, for carbon dioxide (CO2) and methane (CH4) observation, c) Instrument 3, centered at 2062 nm for carbon dioxide and d) Instrument 4, centered at 2328 for carbon monoxide (CO) and methane. From low-Earth orbit, these instruments have a field-of-view of 10 to 15 degrees, and a spatial resolution of 2 km square. These instruments have a spectral resolving power ranging from ten to twenty thousand, and can monitor columnaverage dry air mole fraction of carbon dioxide (XCO2) at 1.5 ppm, and methane (XCH4) at 7 ppb. These new instruments will advance the use of immersion grating technology in spectrometer instruments in order to reduce the size of the instrument, while improving performance. These compact, capable instruments are envisioned to be compatible with small satellites, yet modular to be configured to address the particular science questions at hand. Here we report on the current status of the instrument design and fabrication, focusing primarily on Instruments 1 and 2. We will describe the key science and engineering requirements and the instrument performance error budget. We will discuss the optical design with particular emphasis on the immersion grating, and the advantages this new technology affords compared to previous instruments. We will also discuss the status of the focal plane array and the detector electronics and housing. Finally, we report on a new approach – developed during this instrument design process - which enables simultaneous measurement of both orthogonal polarization states (S and P) over the field-of-view and optical bandpass. We believe this polarization sensing capability will enable science observations which were previously limited by instrumental and observational degeneracies. In particular: improved sensitivity to all species, better sensitivity to surface polarization effects, better constraints on aerosol scattering parameters, and superior discrimination of the vertical distribution of gases and aerosols.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
J. Kent Wallace, Charles E. Miller, Shannon Kian Zareh, Yuri Beregovski, Mayer Rud, Randall Bartos, James P. McGuire, Thomas S. Pagano, Daniel W. Wilson, Cynthia B. Brooks, Daniel T. Jaffe, Andre Wong, Didier Keymeulen, Peter Sullivan, Elliott Liggett, Michael Bernas, Amy Mainzer, Annmarie Eldering, and Dejian Fu "CARBO-The Carbon Observatory Instrument Suite: the next generation of Earth observing instruments for global monitoring of carbon gases", Proc. SPIE 10785, Sensors, Systems, and Next-Generation Satellites XXII, 107850U (25 September 2018); https://doi.org/10.1117/12.2513286
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polarization

Sensors

Telescopes

Diffraction gratings

Carbon

Carbon monoxide

Optical design

Back to Top