Fabrication and characterization of 3D printing flexible capacitive pressure sensor for wearable device and biomechanical applications

Gwang-Wook Hong; Sunkon Lee; Joo-Hyung Kim

doi:10.1117/12.2515290

27 March 2019 Fabrication and characterization of 3D printing flexible capacitive pressure sensor for wearable device and biomechanical applications

Gwang-Wook Hong, Sunkon Lee, Joo-Hyung Kim

Author Affiliations +

Proceedings Volume 10969, Nano-, Bio-, Info-Tech Sensors and 3D Systems III; 109690N (2019) https://doi.org/10.1117/12.2515290
Event: SPIE Smart Structures + Nondestructive Evaluation, 2019, Denver, Colorado, United States

Abstract

Biological monitoring technology based on pressure sensing is a very useful for human diagnosis method as an assistive equipment, which should be comfortable on wearing position for user as well as and patient. Especially, pressure monitoring for prosthetic arm and artificial leg is the critical element to maintain the safety of the amputees. In this research, the fabrication and characterization of a novel flexible pressure sensor was done to measure the actual working pressure between the surface of human body and assistive device for biomechanical techniques. The ultimate goal of the sensor design is targeted for use in robotic and prosthetic limb, where feedback and ability to detect forces associated with slip is crucial point. To fabricate the capacitive type pressure sensor, finite element method (FEM), additive manufacturing (3D-printing) and signal processing were used. FEM simulation was performed with Comsol S/W for optimal structure design to evaluate with the structural deformation and maximum capacitance value up to 500 kPa in sensor range. Sensor with a full scale volume thickness under 10 mm were produced using FDM 3D-printingtechnique. A passive two-terminal electrical component part of capacitive pressure sensor was fabricated with conductive thermoplastic material and medium side of dielectric layer to keep soft and flexible structure. The output signal from the pressure sensor and related signal processing system was connected to a voltage divider circuit to amplifying the signal, multiplexer, microcontroller unit included analog to digital converter and indicating program. As a result, capacitive pressure sensing technology embedded in 3D printed structure can be considered for maintenance of stability and comfortability to amputees.

Citation Download Citation

Gwang-Wook Hong, Sunkon Lee, and Joo-Hyung Kim "Fabrication and characterization of 3D printing flexible capacitive pressure sensor for wearable device and biomechanical applications", Proc. SPIE 10969, Nano-, Bio-, Info-Tech Sensors and 3D Systems III, 109690N (27 March 2019); https://doi.org/10.1117/12.2515290

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
7 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Sensors

Fused deposition modeling

3D printing

Additive manufacturing

Finite element methods

3D surface sensing

Capacitance

Show All Keywords

Keywords/Phrases

Search In:

Publication Years