Raman laser spectrometer flight model assembly and integration verification: end-to-end functional tests for thermal strap assembly procedure redefinition

J. Rodríguez-Prieto; G. Ramos; A. G. Moral; C. P. Canora; F. Rull; T. Belenguer; C. Quintana; J. Zafra; J. Cabrero; A. Santiago; D. Escribano

doi:10.1117/12.2530552

9 September 2019 Raman laser spectrometer flight model assembly and integration verification: end-to-end functional tests for thermal strap assembly procedure redefinition

J. Rodríguez-Prieto, G. Ramos , A. G. Moral , C. P. Canora, F. Rull, T. Belenguer, C. Quintana, J. Zafra, J. Cabrero, A. Santiago, D. Escribano

Author Affiliations +

Proceedings Volume 11115, UV/Optical/IR Space Telescopes and Instruments: Innovative Technologies and Concepts IX; 1111505 (2019) https://doi.org/10.1117/12.2530552
Event: SPIE Optical Engineering + Applications, 2019, San Diego, California, United States

Abstract

Raman Laser Spectrometer (RLS) is one of the Pasteur Payload instrument of the ExoMars 2020 mission, within the ESA’s Aurora Exploration Program. RLS is mainly composed by SPU (Spectrometer Unit), iOH (Internal Optical Head), and ICEU (Instrument Control and Excitation Unit), and will analyse Mars surface and sub-surface crushed samples by Raman spectroscopy. For the RLS Flight Model (FM) verification campaign, an end-to-end quick functional test was developed to evaluate the instrument performances stability. This test consists on a comparison of the centre pixel and the FWHM (Full Width at Half Maximum) of a set of Ne calibration lamp peaks, and was decided to be done before and after ever risky activity (transport, thermal tests, etc.) In the course of the end-to-end functional test carried out on RLS FM as part of the pre-delivery checks, an increment on the FWHM calibration lamp peaks was observed. Such performance variation was also noted to be dependent on the way the SPU thermal strap was assembled and the environmental conditions (P and T) in which the spectra were acquired. For that reason, a new SPU thermal strap assembly procedure was decided to be designed in order to ensure no extra negativeeffect was going to appear during the RLS FM installation on the ALD (Analytical Laboratory Drawer) and the instrument flight operation. In this paper, a deep exploration of the conditions in which such “de-focus” (probably due to an excessive thermal gradient between SPU structure and CCD) appears is carried out, demonstrating that the new thermal strap assembly procedure minimizes an incidental extra de-focus appearance during RLS installation on the ALD.

Conference Presentation

Citation Download Citation

J. Rodríguez-Prieto, G. Ramos , A. G. Moral , C. P. Canora, F. Rull, T. Belenguer, C. Quintana, J. Zafra, J. Cabrero, A. Santiago, and D. Escribano "Raman laser spectrometer flight model assembly and integration verification: end-to-end functional tests for thermal strap assembly procedure redefinition", Proc. SPIE 11115, UV/Optical/IR Space Telescopes and Instruments: Innovative Technologies and Concepts IX, 1111505 (9 September 2019); https://doi.org/10.1117/12.2530552

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available