Paper
28 August 2019 Utilising thermal annealing for multiplexing and sensitivity enhancement of polymer optical fibre sensors
Author Affiliations +
Proceedings Volume 11199, Seventh European Workshop on Optical Fibre Sensors; 111993E (2019) https://doi.org/10.1117/12.2541767
Event: Seventh European Workshop on Optical Fibre Sensors, 2019, Limassol, Cyprus
Abstract
Thermal annealing was initially introduced for multiplexing purposes, since it can induce a permanent negative Bragg wavelength shift for polymer fibre grating sensors. At a later stage, it is shown that annealing can also provide additional benefits, such as strain and humidity sensitivity enhancement and augmented temperature operational range. In this paper, we report additional usage of thermal annealing on PMMA fibre Bragg grating sensors. We show the possibility to tune Bragg wavelengths to longer wavelengths permanently by stretching the polymer optical fibre during the thermal annealing process. An array of sensors fabricated with only one phase-mask, demonstrates the concept by having Bragg wavelengths below and above the original inscribed spectral position. In addition, we report that thermal annealing can be also used to enhance the performance of sensors when used for stress and force monitoring.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
A. Pospori, C. A. F. Marques, G. Sagias, H. Lamela-Rivera, D. Sáez-Rodríguezd, K. Nielsen, O. Bang, and D. J. Webb "Utilising thermal annealing for multiplexing and sensitivity enhancement of polymer optical fibre sensors", Proc. SPIE 11199, Seventh European Workshop on Optical Fibre Sensors, 111993E (28 August 2019); https://doi.org/10.1117/12.2541767
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Annealing

Sensors

Polymer optical fibers

Polymers

Multiplexing

Bragg gratings

Optical fibers

Back to Top