|
1.INTRODUCTIONThe urban area tends to expand in parts of the world as the increment of population migration to an urban area. The expansion of urban area tends to alter the urban landscape that the proportion of built-up area dominated the space as the demand for economic activities and space to live. Yogyakarta has attracted tourists and students recently, which contributes to the more built-up area to accommodates the activities, for instance, student housing, restaurants and hotels. As a consequence, Yogyakarta city expanded as the growth of the urban area as the implication of these demands. The study of urban growth of Yogyakarta city had been studied by Giyarsih (2010). The growth of the urban area of Yogyakarta through a long process other than short one, the spatial distribution of the transformation influenced by street connections and growth areas. Moreover, the growth of Yogyakarta in terms of the expansion of urban area according to the finding of Divigalpitiya, P & Handayani, K. N (2015) shows that Yogyakarta city experienced outward expansion commenced with small urban patches then merged to form larger urban patches. The visible expansion mainly through the period from 2002 to 2013. As the tendency of urban growth follows the increase of paved-surface/built-up area, it affects the state of urban climate. Urban microclimate associated with effects of urban landscape design had studied in Yang, Lin, & Li (2018). One of the findings is the shade trees combined with grass can reduce air temperature by 0.75oC. Therefore, the monitor of temperature in the urban area becomes vital as the temperature is one of the elements of climate. The change of temperature has indirect impacts on urban climate, for instance, erratic rainfall and rainstorm, and other hydro-meteorological hazards. Furthermore, the importance of temperature monitoring has been increasing as the concern in global warming. The use of Remote sensing technique become possible to extract phenomena without direct contact with objects (Lillesand & Kieffer, 2002). Remote sensing imagery has been widely used as input to monitor the state of temperature. Remote sensing has the advantage of its efficacy and efficiency due to the less fieldwork and affordability comparing to field measurement.This image records the earth’s surface every 16 days, making it possible to use it for monitoring an area regularly. Each pixel of Landsat 8 multispectral image represents 30 m x 30 m, with 12 bits of radiometric resolution. Landsat 8 consists of two instruments, namely Operational Land Imager (OLI) and Thermal Infrared Sensor (TIRS) which provides a wide range of spatial scope and decades of temporal data assuring to give beneficial inputs for temperature monitoring. This paper attempts to demonstrate a sequence to extract land surface temperature (LST) information from Landsat 8 thermal band from two different years, on 2014 and 2018, in Yogyakarta urban area. This research emphasizes on the methodology which to provide a step-by-step guide for future monitoring of temperature involving longer time series data. 2.STUDY AREASpecial Region of Yogyakarta is located in the southern part of Java Island and has a direct border to the Hindia Ocean (Figures 1). The capital city of Yogyakarta has 32,1 km2 of area and located in the centre of the province. It is famous for its culture and education and tourist destination. Although it is known as the smallest province in Java island, Yogyakarta is one of the most livable cities in Indonesia (IAP,2014). Statistic Agency of Yogyakarta reported there had been growing in population. The average population density is 13,007 inhabitants/km2. The urban area of Yogyakarta has been growing and encompasses 26 districts in total. The average rainfall in Yogyakarta is 2.012 mm/years. The average air humidity is quite high, ranges from 81-90%, where the lowest occurs in August and September, which is 81%. The average temperatures around 27°C. The dry season begins in April until October. 3.DATA AND METHODOLOGYLandsat 8 Thermal Infrared band (TIR) was adopted to extract land surface temperature (LST) information in Yogyakarta urban area. Landsat 8 TIR images were acquired from two different dates in the dry season, in August 2014 and May 2018. Due to the LST extraction process, atmospheric correction parameters obtained from the website (https://atmcorr.gsfc.nasa.gov/) such as transmissivity, upwelling, and downwelling radiance (Figure 3). Normalized Difference Vegetation Index (NDVI) value also extracted to determine emissivity value before LST extraction. Atmospheric correction was also applied to obtain reflectance value to extract NDVI. The required parameters to extract temperature were obtained from image metadata. Generally, land surface temperature extraction from Landsat 8 TIR band requires several following procedures:
Emissivity was calculated using Equation 5 The equations below were applied to extract land surface temperature from Landsat 8 TIR image. Digital Number (DN) to Spectral Radiance:
Spectral radiance to brightness temperature was calculated using equation mentioned in McCarville, et. Al. (2011):
Brightness temperature to land surface temperature was calculated as follows (Weng et al., 2003):
Atmospheric correction by applying equation mentioned in Coll et al. (2010):
Emissivity was calculated using the following equation (Urbanski, 2014): Reflectance value was calculated as follows (Congedo, 2016):
The LST image is visualized in 5°C interval value. Two different images then analyzed in order to present how the difference of temperature between two image. 4.RESULT AND DISCUSSIONThe Geometric correction was not applied to the images because it was conducted systematically from the data provider. However, the two-image acquisition was processed through the whole steps of atmospheric correction before temperature extraction to reduce atmospheric disturbance and improve temperature extraction value in terms of its accuracy. Normalized Difference Vegetation Index (NDVI) calculated for obtaining emissivity value which used as the input for determining Land Surface Temperature (LST). The NDVI images of 2014 and 2018 classified into the same range. According to the range, it is estimated that the built-up area made up about 49% and 50% of the total urban area, respectively, according to those two images. It infers that the built-up area relatively remains unchanged. In other words, urban expansion does not occur. The NDVI results are shown in Figure 3 (a) and (b). According to those images, low NDVI values (approximate to and below 0 (zero) which indicates likely as paved-area) concentrated in the city centre. It is apparent that low NDVI values (in red-orange) depicted along the network line (asphalt road) in both images. In addition to NDVI, the average emissivity value decreased, from 0.93 in 2014 to 0.88 in 2018. This result implies that more pixels in 2018 that reflecting the incoming energy compared one in 2014 (Figure 3 (c) and (d)). The emissivity of two images also shown in the histogram in Figure 6 (a) 2014 (b) 2018. According to the histogram’s shape. The latter shows shaper bell on the left compared to 2014 image, in order word, flatter and gradually increase steadily compared to one in 2018. This pattern indicates the emissivity value distributes likely to the lower one. In this paper, emissivity value is not further discussed as emissivity value depends on the function of wavelength together with temperature. Therefore, emissivity alone is complex to obtain. Therefore, further research is needed, for instance, using an instrument to estimates emissivity value and different time of image acquisition. Emissivity value can be more sensitive. The statistics of emissivity value, as shown in Table 1, with maximum and minimum in 2014 and 2018 value are 0.98 & 0.65, and 0.97 & 0.37, respectively. Table 1.Statistics of Emisivity in 2014 and 2018
The extracted temperature is assumed as “kinetic temperature” since it involved emissivity. The result of temperature extraction shown in Figure 4 (a) and (b). The LST was classified into 5°C interval. According to the map, the high LST distributes along the main road along with the concentration of paved-surface. The total study area is 19,662 Ha. Figure (5) shows the statistics of temperature distribution for the two-analyzed images in the classified interval. In 2014, the area with LST around 20 – 30°C was under 1,000 Ha. The area with 30 – 35 °C is around 5,000 Ha. About 7,000 Ha is covered with the surface at temperature ranges from 35 to 40 °C, which makes the most significant proportion of the total area of Yogyakarta Urban Area. The area with 40 - 45 °C and 45 – 50 °C interval occupied around less than 6,000 Ha and 2,000 Ha, consecutively. According to the 2018 image, the area with 25 to 30 °C occupies a small area of Yogyakarta Urban Area. The four highest areas occupy the urban area at range 35 - 40 °C, 40 – 45 °C, 30 - 35 °C, and 45 – 50 °C, respectively; being 35 – 40 °C dominates the surface, reach more than 7,000 Ha. Both images of 2014 and 2018 show that the highest proportion of LST in the study area is around 35 - 40 °C. Such high-temperature area, more than 50 °C, some reach 95 – 100 °C. The probable cause of such high temperature might find from asphalt road or the industrial chimneys. Both images also show a similar pattern. It illustrates that the centre of the city has the highest average temperature. The further from the city centre, the higher the temperature. According to the graph, it simply shows that the distribution of pixels with lower temperature tends to shift into higher temperature, comparing 2014 and 2018 image. The histograms, as shown in Figure 7 (a) 2014 (b) 2018, concede the shifted values aforementioned. Table 2 represents the statistical value of temperature extraction of both image 2014 and 2018. The average temperature in 2014 was 38°C, it rose to 39,5°C in 2018. The minimum and maximum value rose by approximately 4 °C and 18 °C, respectively; while the standard deviation is not considerably changed. Table 2.Statistics of Land Surface Temperature in 2014 and 2018
5.CONCLUSIONThis result shows that the urban area in terms of the built-up area relatively remains unchanged. The average emissivity of both two images of 2014 and 2018 decreases which infers more proportion of reflected energy by the surface in the study area. The temperature tends to increase according to the average land surface temperature (LST). REFERENCESColl, C., Joan M. Galve, Juan M. Sánchez., and Caselles,V.,
“Validation of Landsat-7/ETM+ Thermal Band Calibration and Atmospheric Correction With Ground-Based Measurements,”
IEEE Transactions On Geoscience And Remote Sensing, 48
(1),
(2010). https://doi.org/10.1109/TGRS.2009.2024934 Google Scholar
Congedo,L.,
“Semi-Automatic Classification Plugin Documentation,”
(2013). https://doi.org/http://dx.doi.org/10.13140/RG.2.2.29474.02242/1 Google Scholar
Divigalpitiya, P., Handayani, K. N.,
“Measuring the Urban Expansion Process of Yogyakarta City in Indonesia. Urban Expansion Process And Spatial and Temporal Characteristics of Growing Cities,”
International Review For Spatial Planning And Sustainable Development, 3
(4), 18
–32
(2015). https://doi.org/10.14246/irspsd.3.4_18 Google Scholar
Giyarsih, S. R.,
“Urban Sprawl of the City of Yogyakarta, Spacial Reference To The Stage of Spatial Transformation,”
Indonesian Journal of Geography, 42
(1), 47
–58
(2010). Google Scholar
IAP, Indonesia Livable City Index 2014, IAP, Jakarta Google Scholar
Lillesand, T.M., and Kieffer, K.W., Remote Sensing and Image Interpretation, John Wiley & Son Inc., New York Google Scholar
McCarville, D., Buenemann, M., and Bleiweiss,M.,
“Atmospheric Correction of Landsat Thermal Infrared Data: A Calculator Based on North American Regional Reanalysis (NARR) Data.,”
in ASPRS Annual Conference,
(2011). Google Scholar
Urbanski, J.,
“Integration of GEOBIA with GIS for Semi-automatic Land Cover Mapping from Landsat 8 Imagery,”
(2014). Google Scholar
USGS,
“Landsat 8,”
(2019). Google Scholar
Weng, Q.,Lub, D., and Schubring,J.,
“Estimation of land surface temperature–vegetation abunandce relationship for urban heat island studies,”
Remote Sensing of Environment, 89
(4), 467
–483
(2004). https://doi.org/10.1016/j.rse.2003.11.005 Google Scholar
Yang, W., Lin, Y., & Li, C. Q.,
“Effects of Landscape Design on Urban Microclimate and Thermal Comfort in Tropical Climate,”
Advances in Meteorology,
(2018). https://doi.org/10.1155/2018/2809649 Google Scholar
|