Effect of heat sources on microstructure and properties of duplex stainless steels fabricated by additive manufacturing

Di Zhang; Aobo Liu; Bangzhao Yin; Peng Wen

doi:10.1117/12.2601291

9 October 2021 Effect of heat sources on microstructure and properties of duplex stainless steels fabricated by additive manufacturing

Di Zhang, Aobo Liu, Bangzhao Yin, Peng Wen

Author Affiliations +

Proceedings Volume 11892, Advanced Laser Processing and Manufacturing V; 1189203 (2021) https://doi.org/10.1117/12.2601291
Event: SPIE/COS Photonics Asia, 2021, Nantong, JS, China

Abstract

The balanced two-phase microstructure of austenite and ferrite endows duplex stainless steels (DSSs) excellent mechanical properties and high corrosion resistance. Additive manufacturing (AM) has been applied to the fabrication of DSS structures with the increased use of DSSs in corrosive environment. Direct energy deposition (DED) technologies, including laser metal deposition (LMD) and wire arc additive manufacturing (WAAM), have been regarded as the promising AM processes considering the industrial requirement of cost and size. The formation quality, microstructure evolution, mechanical properties and corrosion resistance largely depends on the heat sources used in AM processes. Super DSS 2594 powder and wire were used as feedstocks respectively for LMD and WAAM. A single-wall body of multiple layers was built with few defects. The chemical composition and microstructure were characterized. The effect of heat sources on mechanical and electrochemical properties was compared. The LMD samples exhibited relatively lower mechanical properties and weaker corrosion resistance than WAAM samples, which was resulted by more element loss due to the higher energy intensity during the LMD process. The results indicated that a proper content and uniform distribution of alloying element is critical to AM DSS parts.

Conference Presentation

Citation Download Citation

Di Zhang, Aobo Liu, Bangzhao Yin, and Peng Wen "Effect of heat sources on microstructure and properties of duplex stainless steels fabricated by additive manufacturing", Proc. SPIE 11892, Advanced Laser Processing and Manufacturing V, 1189203 (9 October 2021); https://doi.org/10.1117/12.2601291

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available