Paper
13 December 2021 Optical surface error analysis and compensation technique based on Zernike polynomial coefficients
Author Affiliations +
Proceedings Volume 12071, 10th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing and Metrology Technologies; 1207108 (2021) https://doi.org/10.1117/12.2604688
Event: Tenth International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT 2021), 2021, Chengdu, China
Abstract
Ultra-precision turning technology is widely used in the machining process of optical mirrors. Due to the influence of machine motion error, clamping error, tracking error and other factors, ultra-precision turning often deviates from the ideal position during the actual machining process. Various error factors are coupled with each other, and it is difficult to compensate by establishing an accurate error model at present. This paper proposes an optical surface error compensation method based on zernike polynomials. Firstly, the surface error is reconstructed with Zernike polynomials. Then, by analyzing the frequency distribution of the optical surface error, the error corresponding to a specific Zenick coefficient is selected. Finally, based on the fast tool servo system, the original machining path is corrected according to the error compensation strategy. By compensating a Φ100 mm mirror, the surface accuracy is improved from PV 1.83 μm, RMS 0.47 μm to PV 0.38 μm, RMS 0.04 μm. The experimental results show that the error compensation strategy proposed in this paper can significantly reduce the optical surface error and improve the machining accuracy.
© (2021) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zelong Li, Chaoliang Guan, Yifan Dai, and Jiahao Yong "Optical surface error analysis and compensation technique based on Zernike polynomial coefficients", Proc. SPIE 12071, 10th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing and Metrology Technologies, 1207108 (13 December 2021); https://doi.org/10.1117/12.2604688
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Error analysis

Zernike polynomials

Fourier transforms

Mirrors

Monochromatic aberrations

Ceramics

Defense technologies

RELATED CONTENT


Back to Top