Paper
2 November 2023 Preparation and nondestructive inspection method of overhead conductors with multi-core rod thermoplastic carbon fiber composites
Jie Liu, Yanwei Xia, Boyan Jia, Likun Ding, Yixin Wang, Xiaoyu Yi
Author Affiliations +
Proceedings Volume 12919, International Conference on Electronic Materials and Information Engineering (EMIE 2023); 1291904 (2023) https://doi.org/10.1117/12.3011008
Event: 3rd International Conference on Electronic Materials and Information Engineering (EMIE 2023), 2023, Guangzhou,, China
Abstract
The overhead conductors prepared by the traditional composite overhead conductor preparation method have low strength and poor arc sag characteristics, so we propose the preparation and nondestructive inspection method for the overhead conductors with multi-core rod thermoplastic carbon fiber composites. The composition of the overhead conductor is planned and designed, and the experimental equipment is used to prepare the overhead conductor, and the static mechanical properties and apparent quality of the prepared conductor are tested. In the experiments, the proposed method was verified for the preparation effect. The analysis of the experimental results shows that the composite overhead conductor prepared by the proposed method has a smooth thermal expansion curve and excellent arc sag characteristics.
(2023) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Jie Liu, Yanwei Xia, Boyan Jia, Likun Ding, Yixin Wang, and Xiaoyu Yi "Preparation and nondestructive inspection method of overhead conductors with multi-core rod thermoplastic carbon fiber composites", Proc. SPIE 12919, International Conference on Electronic Materials and Information Engineering (EMIE 2023), 1291904 (2 November 2023); https://doi.org/10.1117/12.3011008
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Carbon fibers

Aluminum

Composites

Alloys

Nondestructive evaluation

Materials properties

Back to Top