Paper
1 February 1991 Design and performance of a small two-axis high-bandwidth steering mirror
Author Affiliations +
Proceedings Volume 1454, Beam Deflection and Scanning Technologies; (1991) https://doi.org/10.1117/12.28030
Event: Electronic Imaging '91, 1991, San Jose, CA, United States
Abstract
A two-axis, high-bandwidth, small-aperture steering mirror called the High Bandwidth Steering Mirror (HBSM) has been designed, fabricated, and tested. The mirror/mechanism prototype functions within a servo loop either scanning a field of view or tracking a radiation source. The design focused on elements making up the beam-steering mechanism: mirror, restoring flexures, actuators, position sensors, and encompassing housing, and the part each component plays in making a mechanical system suitable for high-bandwidth operation. Inclusion of a novel flexural support allows one-degree peak-to-peak angular stroke (shaft space) at low frequencies and a small-signal closed-loop bandwidth of up to 10 kHz without the usual mechanical resonance-induced loop instabilities. This increased bandwidth allows substantial rejection of a disturbance spectrum in the 10-1000 Hz range and execution of fast, complex scan patterns. Pointing accuracies of 0.2 micronrad have been achieved in the laboratory. Details of the mechanical design and fabrication issues as well as the control-loop implementation are discussed. Test data are presented along with reports of the mirror's performance in use as an extended sensor.
© (1991) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Gregory C. Loney "Design and performance of a small two-axis high-bandwidth steering mirror", Proc. SPIE 1454, Beam Deflection and Scanning Technologies, (1 February 1991); https://doi.org/10.1117/12.28030
Lens.org Logo
CITATIONS
Cited by 7 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Mirrors

Actuators

Calibration

Position sensors

Servomechanisms

Manufacturing

RELATED CONTENT


Back to Top