Paper
22 October 1993 Optical constants of sputtered ZrN films for heat mirror applications
Monica Veszelei, Kent E. Andersson, Arne Roos, Carl-Gustaf Ribbing
Author Affiliations +
Abstract
Opaque and semi-transmitting film of ZrN have been reactively magnetron sputtered and their optical performance for solar control coating applications evaluated. The optical constants of the opaque films were determined from near normal reflectance measurements and Kramers- Kronig calculations over the interval 0.23 - 3.0 micrometers . The thin film optical constants were determined with combined R- and T-measurements. Systematic variations with growth conditions were observed. Thin films were observed to have higher n-values in the visible, a change that could be partly compensated by substrate heating. For the triple layers: glass / ZrO2 / ZrN / Zro2 it was noted that the crystallinity of the first oxide did not influence the refractive index of this oxide, but improved significantly the selectivity of the nitride growing upon it. Triple layers for solar control applications with 57% luminous transmittance and close to 1/3 each of solar transmittance, reflectance and absorption have been realized.
© (1993) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Monica Veszelei, Kent E. Andersson, Arne Roos, and Carl-Gustaf Ribbing "Optical constants of sputtered ZrN films for heat mirror applications", Proc. SPIE 2017, Optical Materials Technology for Energy Efficiency and Solar Energy Conversion XII, (22 October 1993); https://doi.org/10.1117/12.161968
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Oxides

Multilayers

Transmittance

Reflectivity

Coating

Thin films

Opacity

Back to Top