Paper
7 October 1980 Optical Radiation Measurements And Their Use In Hazard Evaluation
R. J. Landry
Author Affiliations +
Proceedings Volume 0229, Ocular Effects of Non-Ionizing Radiation; (1980) https://doi.org/10.1117/12.958794
Event: 1980 Technical Symposium East, 1980, Washington, D.C., United States
Abstract
Optical radiation hazard evaluation for broad band sources must usually be performed by a highly trained specialist with the use of sophisticated instrumentation. While some direct reading ultraviolet radiation hazard evaluation instruments have been developed, no similar instrumentation for retinal hazard evaluation is available. The general principles of optical radiation hazard evaluation are reviewed along with the quantities, units, and measurement systems used. A new prototype ultraviolet radiation hazard monitor utilizing a spectrograph and spectral weighting mechanical mask, which provides a direct reading of the effective irradiance according to the ACGIH Threshold Limit Values, has recently been developed. The sensitivity for this prototype instrument is 10-7 W/cm2 (effective irradiance) with an uncertainty of less than 30%.
© (1980) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
R. J. Landry "Optical Radiation Measurements And Their Use In Hazard Evaluation", Proc. SPIE 0229, Ocular Effects of Non-Ionizing Radiation, (7 October 1980); https://doi.org/10.1117/12.958794
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Ultraviolet radiation

Lamps

Prototyping

Sensors

Calibration

Spectrographs

Quartz

Back to Top