Paper
14 July 1995 Damage morphologies and causes of laser-induced damage of thin oxide films at 248 nm
G. Pfeifer, E. Erben, Guenter Reisse, Bernhard Steiger
Author Affiliations +
Abstract
The effect of ultraviolet laser radiation (248 nm) on dielectric thin films can be separated into intrinsic absorption of the film material, absorption at structure faults of the layer like grain boundaries or F-centers, and the absorption at inclusions of different materials. Besides this, the film substrate interface as well as the substrate material by itself can act as absorbing regions. Our investigations to the damage morphology of laser induced changes at oxide thin films show typical damage structures for the different sites, where the main part of the laser radiation was absorbed. In some cases we found surprising figures, e.g. lens formed film detachments between damage pits originating from absorbing inclusions. Together with calculations of the temperature field, which is generated by the laser pulse, the dominating damage mechanisms are estimated. At the oxide films under test, the damage is released by inclusion absorption with additional film ablation by overlapping electron avalanches.
© (1995) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
G. Pfeifer, E. Erben, Guenter Reisse, and Bernhard Steiger "Damage morphologies and causes of laser-induced damage of thin oxide films at 248 nm", Proc. SPIE 2428, Laser-Induced Damage in Optical Materials: 1994, (14 July 1995); https://doi.org/10.1117/12.213755
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Absorption

Laser induced damage

Thin films

Laser damage threshold

Oxides

Coating

Silica

Back to Top