Paper
26 August 1996 High-average-power frequency conversion with phase-conjugated laser systems
Stefan Seidel, Guido Mann
Author Affiliations +
Proceedings Volume 2788, High-Power Lasers: Gas and Solid State Lasers; (1996) https://doi.org/10.1117/12.248615
Event: Lasers, Optics, and Vision for Productivity in Manufacturing I, 1996, Besancon, France
Abstract
High average powers at 532 nm are of great interest for material processing applications because the absorption of metals and other materials increases with shorter wavelength. As the fundamental laser source we developed a Q-switched Nd:YAG oscillator-amplifier system with an average output power of 215 watts and a beam parameter product of less than 1 mm*mrad. The system operates with 100 Hz repetition rate and emits a burst of twenty Q-switch pulses during each flash-lamp pulse. The pulse duration of a single pulse increases from 100 to 200 nanoseconds with increasing pumping power. The high beam quality of the amplified beam is realized by a double-pass configuration of the amplifier with a phase conjugating SBS-cell. Additionally the thermally induced birefringence of the amplifiers is compensated for by a 90 degree-rotator between two identical amplifier rods. An output power of 164 W is frequency doubled in a KTP-crystal to 82 Watt average output power in the green which corresponds to 50% of doubling efficiency.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Stefan Seidel and Guido Mann "High-average-power frequency conversion with phase-conjugated laser systems", Proc. SPIE 2788, High-Power Lasers: Gas and Solid State Lasers, (26 August 1996); https://doi.org/10.1117/12.248615
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Oscillators

Amplifiers

Optical amplifiers

Nonlinear crystals

Crystals

Q switching

Telescopes

Back to Top