Paper
20 January 1997 Design rule and error analysis of a rangefinder using laser scanning space-encoding method
Author Affiliations +
Abstract
This paper deals with a fast rangefinder based on laser scanning space-encoding method. In the first place the principle of image-encoding is introduced and the calculation formulas of measurement values in 3D rectangular coordinate system are given. In the second place the design rules are put forward at the angle of the measuring volume, shading light and received light power properties. At last the measurement errors caused by quantization errors, the resolutions and their errors are discussed through error analysis, and then the design rules to reduce effect of quantization errors are presented.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xiaoyang Yu, Jian Zhang, Liying Wu, and Xifu Qiang "Design rule and error analysis of a rangefinder using laser scanning space-encoding method", Proc. SPIE 2909, Three-Dimensional Imaging and Laser-Based Systems for Metrology and Inspection II, (20 January 1997); https://doi.org/10.1117/12.263326
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Error analysis

Laser scanners

Mirrors

CCD cameras

Quantization

3D image processing

3D metrology

RELATED CONTENT

3D Measurement From 10 CM To 10 M
Proceedings of SPIE (February 15 1989)
Stereo imaging system for dimensional measurement
Proceedings of SPIE (January 20 1997)
Wide-Area, High Dynamic Range 3-D Imager
Proceedings of SPIE (April 01 1990)

Back to Top