Paper
7 February 1997 Improving the performance of a shear-type piezo printhead
Alfred Zollner, Peter Moestl
Author Affiliations +
Proceedings Volume 2949, Imaging Sciences and Display Technologies; (1997) https://doi.org/10.1117/12.266340
Event: Advanced Imaging and Network Technologies, 1996, Berlin, Germany
Abstract
For portable printers low energy consumption of the printhead is important. Because of their high efficiency shear-type piezo printheads are the best choice. However, when scaling down the dimensions the effects of crosstalk between two adjacent channels become increasingly visible. In order to study the interaction of different channels a simple linear model was developed. The model includes the mechanical characteristics of the actuators and some general coupling elements between the actuators. Due to the simplicity of the model a 360 dots per inch printhead with 64 nozzles could be simulated as a whole. A set of parameters was determined from crosstalk measurements so that the output values of the model fitted the measured values. The results are in good agreement with the measurements. The model was helpful in finding a means to compensate pattern-dependent velocity deviations by adjusting the control pulse, allowing the complete elimination of crosstalk effects. With a second pulse parameter the refill time of a channel was minimized for all patterns. Hence the firing frequency of the printhead was increased to 8 kHz. The velocity deviations due to crosstalk are less than 5%.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Alfred Zollner and Peter Moestl "Improving the performance of a shear-type piezo printhead", Proc. SPIE 2949, Imaging Sciences and Display Technologies, (7 February 1997); https://doi.org/10.1117/12.266340
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Actuators

Wave propagation

Printing

Velocity measurements

Optimization (mathematics)

Sensors

Acoustics

Back to Top