Paper
31 March 1997 Excimer-laser-irradiated phase masks for grating formation
Robert J. Farley, Peter E. Dyer, Roswitha Giedl
Author Affiliations +
Abstract
The excimer laser provides the necessary optical resolution and sufficiently high fluence to permit rapid micro- structure patterning of polymers and glasses by ablation. Micro-scale gratings and structures formed in this way have potential applications in the fields of opto-electronic devices, display technologies and environmental sensors. Conventional broad-band excimer lasers of poor spatial and temporal coherence can be used to write sub-micron gratings with an appropriate silica phase mask in proximity mode. This simple technique has been used to fabricate fiber Bragg gratings and relief gratings on polymers. The proximity of the mask and target increases the likelihood of damage to the mask during ablation. An alternative approach using Talbot re-imaging is attractive as the mask can be remote from the samples and undesirable orders are rejected. We describe the design of a Talbot interferometer in which the zero and first order beams from a grating are recombined and experiments using this with 193 nm ArF laser illumination to form submicron gratings on polymers and in fibers.
© (1997) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Robert J. Farley, Peter E. Dyer, and Roswitha Giedl "Excimer-laser-irradiated phase masks for grating formation", Proc. SPIE 2992, Excimer Lasers, Optics, and Applications, (31 March 1997); https://doi.org/10.1117/12.270093
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Interferometers

Excimer lasers

Polymers

Fiber Bragg gratings

Laser ablation

Mirrors

Silica

Back to Top