Versatile microflex-based interconnection technique

Hansjoerg Beutel; Thomas Stieglitz; Joerg-Uwe Meyer

doi:10.1117/12.320167

20 July 1998 Versatile microflex-based interconnection technique

Hansjoerg Beutel, Thomas Stieglitz, Joerg-Uwe Meyer

Proceedings Volume 3328, Smart Structures and Materials 1998: Smart Electronics and MEMS; (1998) https://doi.org/10.1117/12.320167
Event: 5th Annual International Symposium on Smart Structures and Materials, 1998, San Diego, CA, United States

Abstract

A new interconnection technique has been developed that allows versatile multiple strand connections between microsensors, sensor arrays, and chips designed for wire bonding. The new technique has been termed `microflex interconnects' (MFI). Conventional wire bonding technique is commonly restricted to planar interconnects with a limited degree of freedom for placing microsystem components. The MFI technique has overcome this limitation by interconnecting microsystem components through custom designed flexible foils with embedded metallized conductors. The MFI foils may also serve as circuit substrates. This basic foil material is polyimide (Du Pont PI 2611) or BCB which are patterned photolithographically. Platinum, gold or either conductive metals are sputtered or evaporated on the foil and patterned using lift-off technique. Several metallization layers can be embedded in the material. Pitch and shape of the MFI contact pads correspond to the one of the chips to be interconnected. A via hole is placed in the center of the MFI contact pads. MFI pads and chip pads are adjusted. Metal balls or wedges generate the electrical and mechanical contact through the vias between the chips and the MFI substrate. An commercial wire bonder is the only equipment needed to perform the MFI method. The MFI technique was applied to bond standard CMOS integrated circuit bond pads with a width of 30 micrometers and a pitch of 70 micrometers to a 10 micrometers thick MFI foil. The integration density of the of the MFI technique correspond to one of the flip- chip technology. Special advantages of the MFI technique are 3D interconnects, the flexibility in design and shape, and easy visual inspection of alignment qualities. The MFI method is also suited for biomedical applications because all materials used are biocompatible.

Citation Download Citation

Hansjoerg Beutel, Thomas Stieglitz, and Joerg-Uwe Meyer "Versatile microflex-based interconnection technique", Proc. SPIE 3328, Smart Structures and Materials 1998: Smart Electronics and MEMS, (20 July 1998); https://doi.org/10.1117/12.320167

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available