Paper
25 August 1998 Coronagraphic and low-emissivity astronomical reflector (CLEAR): heat trap design
Walter A. Siegmund
Author Affiliations +
Abstract
The heat trap in a coronagraphic telescope is located at its prime focus and blocks the transmission of radiation from unwanted portions of the solar disk to subsequent optics in the telescope. This reduces light scattered and heat absorbed by these optics. For observations of the corona, the solar disk is completely blocked, whereas for observations of the disk, typically 90% or more of the disk is blocked. The proposed heat trap design is constructed largely of fused silica plates, partially coated with platinum, and cooled with air. It is robust and handles high irradiance, i.e., almost f megawatt/m2 at f/3.75, without degrading the image quality of the telescope or contributing significant stray light to the focal surface.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Walter A. Siegmund "Coronagraphic and low-emissivity astronomical reflector (CLEAR): heat trap design", Proc. SPIE 3352, Advanced Technology Optical/IR Telescopes VI, (25 August 1998); https://doi.org/10.1117/12.319240
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Silica

Telescopes

Coronagraphy

Platinum

Coating

Heat flux

Astronomy

Back to Top